SC836 Chassis Manual
I/O Shield and Add-On Card Setup
The SC836 chassis includes space for an I/O shield and up to seven add-on/
expansion cards.
I/O Port panel
Figure 5-4: SC836 Chassis Rear Add-on Card slots and I/O ports
Installing an Add-On or Expansion Card
Installing Add-on Cards
1.
Remove the chassis cover.
2.
Locate the motherboard port aligned with the card slot you want to install.
3.
Each slot is secured by one screw located on the top (inside) the chassis.
Remove this screw.
4.
Remove the add-on/ expansion slot cover.
5.
Gently slide the expansion/add-on card into the correct motherboard slot. If
the Add On card requires a riser card, install it at this time. If necessary, slide
the card into the PCI card guide and lock. Never force a component into a
motherboard or the chassis.
6.
Secure the expansion/add-on card with the screw from the I/O panel.
5-8
Add On/Expansion
Card Slots