Display Information; Supported Vesa Modes - Matrox PJ-4OLP User Manual

Display information

# Your Matrox graphics card is 100% VGA compatible and supports all VESA standards:
VBE 2.0 (Super VGA modes), DPMS (energy saving), and DDC-2B (Plug-and-Play
monitor).
To get the most of your Matrox product, we recommend using the highest color palette
#
setting (a 32-bit color palette) for all your displays.
# OpenGL and 3D acceleration are only available with a 16- or 32-bit color palette.
# The display resolutions and refresh rates available depend on your Matrox graphics card,
display driver, software monitor settings, and monitor. For information on the
capabilities of your monitor, see your monitor documentation.
# While using 4 displays at a time, your Matrox graphics card supports display resolutions
up to 1600 × 1200 (standard mode) for each display and 1680 × 1050 (wide screen mode)
for each display with a vertical refresh rate up to 60 Hz.
If you're using multiple monitors, your Matrox hardware uses the same display
#
resolution and monitor settings for all your devices.
# Edge feathering isn't supported with your Matrox product. Edge feathering reduces the
brightness in overlapping regions. Without this compensation, a combined display may
appear brighter where displays overlap. Edge feathering is available with certain
projectors and dedicated external edge-blending hardware.

Supported VESA modes

In the table below, VESA modes supported by your Matrox graphics card are indicated by a
VESA mode number. Many Super VGA DOS programs use VESA modes.
Display
resolution
640 × 400
640 × 480
800 × 600
1024 × 768
1280 × 1024
1600 × 1200
24 Matrox PJ-4OLP – User Guide
(main display)
16 colors 256 colors 32 K colors 64 K colors 16 M colors
— 100
(VGA) 101
102 103
— 105
— 107
— 11C
— —
110 111
113 114
116 117
119 11A
11D 11E
—
112
115
118
11B
11F