Connecting Power Cables; Connecting 2X10 Power Supply Cables - Intel D955XCS Product Manual

Intel Desktop Board D955XCS Product Guide

Connecting Power Cables

NOTE
Failure to use the appropriate power supply and/or not connecting the 12 V (2x4) power connector
to the desktop board may result in damage to the board or the system may not function properly.
See Table 3 on page 13 for power supply requirements.
The 2x12 main power connector on the desktop board is backwards compatible with ATX12V
power supplies with 2x10 power connections. Use of the 1x4 power connection is recommended
with ATX12V power supplies with 2x10 connections when using PCI Express video cards that can
consume up to 75 W. Figure 27 shows the location of the power connectors for a 2x10 power
supply.
1. Observe the precautions in "Before You Begin" on page 23.
2. Connect the 12 V processor core voltage power supply cable to the 2x4 connector. Use the 2x2
to 2x4 adapter if needed.
3. Connect the 1x4 power supply cable to the 1x4 connector.
4. Connect the main 2x10 power supply cable to the 2x12 connector (see Figure 27, 1 and 2).
48
1 2
Figure 27. Connecting 2x10 Power Supply Cables
G
H
I
OR
J
OM17791