Connecting Fans; Connecting Power Cables - Intel D845GERG2 Quick Reference

7 Connecting Fans

The following figure shows the location of the fan connectors. Connect the
processor's fan heat sink cable to the processor fan connector on the board.
Connect the chassis fan cables to the board connectors as shown in the following
figure.
Chassis rear
fan
Chassis front
fan
1
8

Connecting Power Cables

CAUTION
Failure to use an ATX12V power supply, or not connecting the additional
power supply lead to the 12 V processor core voltage connector on
Desktop Boards D845GERG2 and D845GEBV2 may result in damage to
the desktop board and/or power supply.
For more information on the ATX12V power supply, refer to the Intel
Desktop Boards D845GERG2 and D845GEBV2 Product Guide on the
Intel Express Installer CD-ROM.
See the illustration above for the location of the power connectors.
1. Observe the precautions in "Before You Begin" on page 3.
2. Connect the 12 V processor core voltage power supply cable to
the 2x2 connector.
3. Connect the main power cable to the 2x10 connector.
12 Intel Desktop Boards D845GERG2 and D845GEBV2
1
Main power
3
connector
12 V processor core
voltage connector
1
Processor
fan
1
3
1
OM14692
Quick Reference