Connecting Power Supply Cables - Intel DH61SA Product Manual

Intel Desktop Board DH61SA Product Guide

Connecting Power Supply Cables

CAUTION
Failure to use an appropriate power supply and/or not connecting the 12 V power
connector (Figure 19, A) to the Desktop Board may result in damage to the board or
the system may not function properly.
Figure 19 shows the location of the power connectors. The 2 x 12 pin main power
connector (Figure 19, B) is backwards compatible with ATX12V power supplies with
2 x 10 connectors.
1. Observe the precautions in "Before You Begin" on page 27.
2. Connect the 12 V processor core voltage power supply cable to the 2 x 2 pin
connector (Figure 19, A).
3. Connect the main power supply cable to the 2 x 12 pin connector (Figure 19, B).
48
Figure 19. Connecting Power Supply Cables