Installing And Removing A Processor; Installing A Processor; Lift Socket Lever; Lift The Load Plate And Don't Touch The Socket Contacts - Intel D955XCS Product Manual

Intel Desktop Board D955XCS Product Guide

Installing and Removing a Processor

Instructions on how to install the processor to the desktop board are given below.

Installing a Processor

CAUTION
Before installing or removing the processor, make sure that AC power has been removed by
unplugging the power cord from the computer; the standby power LED should not be lit (see
Figure 3 on page 20). Failure to do so could damage the processor and the board.
To install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 23.
2. Open the socket lever by pushing the lever down and away from the socket (see Figure 6,
A and B).
3. Lift the load plate. Do not touch the socket contacts (see Figure 7, C and D).
Figure 7. Lift the Load Plate and Don't Touch the Socket Contacts
28
Figure 6. Lift Socket Lever
C
D
A
B
OM17210
D
OM17211