Connecting Fans; Connecting Power Cables - Intel D845PEBT2 Quick Reference

11 Connecting Fans

The following figure shows the location of the fan connectors. Connect the
processor's fan heat sink cable to the processor fan connector on the board.
Connect the chassis fan cables to the board fan connectors.
Chassis front
fan
1

12 Connecting Power Cables

CAUTION
Failure to use an ATX12V power supply, or not connecting the 12 V
processor core voltage power supply connector to Desktop Board
D845PEBT2 may result in damage to the desktop board and/or power
supply.
For more information on the ATX12V power supply, refer to the Intel
Desktop Board D845PEBT2 Product Guide on the Intel Express Installer
CD-ROM.
See the illustration above for the location of the power connectors.
1. Observe the precautions in "Before You Begin" on page 3.
2. Connect the 12 V processor core voltage power supply cable to the
2x2 connector.
3. Connect the main power cable to the 2x10 connector.
14
1
Chassis rear
fan
Main power
connector
Intel Desktop Board D845PEBT2 Quick Reference
12 V processor core
voltage connector
1
Processor
fan
1
1
OM14804