WingScapes Timelapse PlantCam User Manual page 9

4. Function buttons
SELECT button
Used to confirm selections during SETUP and PLAYBACK modes.
+ or – button
• Used to change the setting values within the SETUP mode.
• Used to move forward or backward while reviewing pictures in
PLAYBACK mode.
LEFT ( ) button
• Used to choose previous settings in SETUP mode.
• Used to delete pictures or video in PLAYBACK mode.
RIGHT ( ) button
• Used to choose next settings in SETUP mode.
• Used to play video clips in PLAYBACK mode.
5. USB OUT port — To plug USB cable to connect to a computer.
6. TV OUT port — To connect to TV to review pictures or video clips.
7. SD MEMORY CARD port — To insert SD card to increase memory
capacity. Note: The metal contact of your card should be facing down
when inserting.
8. Status/Standby Indicator — When the camera is in AUTO mode,
the flashes every 3 seconds to indicate that the camera is powered ON.
To see the status of the camera, click the power button quickly (note: if
camera is within 15 seconds of taking its next photo or video, pressing
this button will reset the timelapse timer).
9. LASER Aiming Device (read warnings)
10. Light Sensor — Measures available light and wakes up camera if
"DAILY WAKEUP" setting is set to "BY LIGHT"
11. Viewfinder
12. Focus Range Setting
Definitions
7