WingScapes Timelapse PlantCam User Manual page 19

Custom Settings & Converting Photos to Timelapse Video
CAMERA NAME
Press the SELECT button, the selection will flash. Press + or – button to
choose the first character: "0"-"9", "-", " " (space) or "A"-"Z". Press the
SELECT button again to make selection and proceed. Repeat process
until camera name has been set. Press the RIGHT ( ) button to choose
next setting. Note: The default name is "PLANTCAM".
CONVERT TO VIDEO
This feature allows you to "stitch" multiple photos (up to 360) into a
video clip. This allows you to show the passage of time greatly acceler-
ated. Press the SELECT button to select the start picture. NOTE: Press
the minus ( – ) button when setting the right-most digit from "0001",
and the the number will set to the last photo available to be stitched.
Press + button to increase or – button to decrease the digit. Then press
the SELECT button to confirm and proceed to the next digit. Repeat the
above steps until four digits are set.
Press the SELECT button to select the end picture. Press + button to
increase or – button to decrease the digit. Then press the SELECT
button to confirm and proceed to the next digit. Repeat the above steps
until four digits are set. Press the SELECT button to start conversion.
Note: Maximum 360 images for 1 video clip. To convert more photos,
adjust video speed, add music, or for more control over the timelapse
video, use video editing software on your computer. We recommend
Windows Movie Maker (Microsoft) or iMovie (Apple).
Note: this function is only available if camera has been programmed to
take PHOTOs. It will not work if other video files are stored in camera
memory or SD card.
17