WingScapes Timelapse PlantCam User Manual page 20

Custom Settings & Converting Photos to Timelapse Video
TV OUT REGION
Press + or – button to choose betweens NTSC (North American) and
PAL (European) standards for the TV OUT port. Press the SELECT button
to make selection. Press the RIGHT ( ) button to choose next setting.
ERASE IMAGES?
Press + or – button to choose betweens YES and NO. If choose YES,
all images are erased. If SD card is installed, this will erase the card
memory. If no SD card is installed, the camera's internal memory will be
erased. Note: all erased images cannot be restored, make a backup if
needed. Press the SELECT button to make selection. Press the RIGHT
( ) button to choose next setting.
UPGRADE FIRMWARE
Press + or – button to choose betweens YES and NO. Choose YES to
upgrade the firmware through a SD-card. Press the SELECT button to
make selection. Press the RIGHT ( ) button to choose next setting.
Firmware updates will be available periodically at www.wingscapes.com.
To determine which firmware version is installed on your camera, set dial
to PLAYBACK and hold select button while turning camera ON.
18