Laser Aim - WingScapes Timelapse PlantCam User Manual

9. LASER AIM

This is a manual function and batteries must be loaded to operate the
laser. But there is no need to switch on the camera.
To aim the laser open the camera door. Turn the rotary dial to the
LASER AIM position. The laser is now activated. There will not be a LCD
readout after the laser is turned ON. A red beam will appear. The red
dot indicates the target area. Aim your camera accordingly.
CAUTION: The laser is hazardous to the eyes. Do not look into beam
or aim at other people.
22