Image Viewing By Tv Out Cable Or Usb Out Cable - WingScapes Timelapse PlantCam User Manual

8. IMAGE VIEWING by TV Out cable or
TV VIEWING
Move the rotary dial to PLAYBACK position. Connect unit TV OUT port
to a VIDEO-IN jack on your TV. Press + or – button to scroll through
recorded images. Press the RIGHT (
the LEFT ( ) button to delete pictures or video clip.
DELETE PHOTO
In the PLAYBACK mode, Press the LEFT (
tion will flash. Press the + button to choose YES, erase the selected
image or – button to choose NO, return back to the previous screen.
Press the SELECT button again to make selection.
USB VIEWING
To connect the camera to a computer, the camera must be ON and the
rotary dial in the SETUP position. Connect the USB cable between the
USB OUT port and your computer. Your computer will recognize the
new device automatically. Wait until the computer finishes installing the
driver.
Double click on the My computer icon on your desktop (or Finder in
Mac OS). You will see a new icon named "TL_PLANTCAM". Double click
the icon and select the folder "DCIM" and then "100_WSPC", all your
image will be stored in this folder. When the USB cable is disconnected
the camera will go back to SETUP mode.
USB Out cable
) button to play a video clip. Press
) button, then the selec-
21