Da-Lite CosmopolitanElectrol Instruction Book page 6

Installation for 220/240V Screens
240V Wiring Diagram
IMPORTANT NOTE: The wall switch is REQUIRED to make
any limit switch adjustments, EVEN if a third party control
system is used. Therefore, it is advised to wire the switch
or provide a 4-conductor connection that is accessible.
Blue (Common)
Power Input
Brown (Hot)
240VAC / 50Hz
Green
6
Motor
Green
Ground to Case
NOTE: Ground–Must be
Connected to Building
Ground
ILT RJ-9 Pin-Outs
IR or Up
Ground Common
Data or Down
RJ9 RJ9
Splitter
Dry Contacts
(Tab Is Facing Up)
Black
Red
Green
+5V
White
UP
UP DN
STOP
3-POSITION
DOWN SWITCH
Front of Wall Back of
Switch Wall Switch
GND
+5V
RJ9