Da-Lite CosmopolitanElectrol Instruction Book page 4

Hide thumbs Also See for CosmopolitanElectrol:

Tensioned Large Cosmopolitan

Without A Built-In Low Voltage Control

Internal wiring has been completed at the factory. Installer must route power to the wall switch and to the junction box located on the left end of

the screen case.

See wiring diagram below for wire connections.

NOTE: This screen can only be controlled by a single 120VAC or 240VAC wall switch. To use multiple switches, an optional low voltage control

must be used.

120V Wiring Diagram

For Standard Wall Switch

Junction Box

Located In Left Endcap

NOTE: A single switch cannot be used

to operate more than one screen.

Contact the factory for further

information.

SPDT Switch with

Center Off

Off

Down

This Switch Can Not

be used with LVC.

Electrol

Black

Red

240 VOLT WIRING DIAGRAM FOR STANDARD WALL SWITCH:

Da-Lite offers two styles of 240 volt wall switches for standard operation.

Please see wiring diagram in wall switch boxes included with screen.

Installation For Screens

White

Red

Black

Green

AC (Common)

AC Hot 120VAC 60HZ 1 AMP

Black/Yellow

Motor

Table of Contents

Tensioned large cosmopolitan electrol