Remote Control Settings; Disk Feature Menu - Philips ShowView DVDR 730/00 User Manual

O
'Low power':
When the DVD recorder was switched off using
STANDBY m , the clock display is also switched off.
O
'Normal':
When the DVD recorder was switched off using
STANDBY m , the clock display remains visible.
O
'Demo mode':
When the DVD recorder is switched off using
STANDBY m , a list of the most important features appears
in the display.
'Display'
You can change the brightness of the display on the DVD recorder.
This setting only affects the DVD recorder when it is switched on.
You can also adjust this setting using the DIM button on the remote
control.
O
'Bright':
The display appears with normal brightness. The disc tray light
is switched on.
O
'Dimmed':
The display appears less bright. The disc tray light is switched
off.
O
'Off':
The display and the disc tray light are switched off.

Remote Control settings

In this menu you can set the remote control type to which your DVD
recorder should respond.
O 'DVD player'
The DVD recorder responds to the supplied remote control
and the remote control of a DVD player (remote control
code RC-6).
Choose this setting if your Philips TV remote supports DVD
functions.
O
'DVD recorder'
The DVD recorder only responds to the supplied remote
control.

Disk feature menu

In this menu, you can make changes that relate to the disc:
Access control
Auto resume
'Access control'
Please read the next chapter 'Access control (child lock)'.
Auto resume
If playback of a pre-recorded DVD video disc or video CD is
interrupted (using STOP h or OPEN/CLOSE J ), playback will
resume where it stopped after you reinsert the disc. This applies not
only to the current disc but also to the last 20 discs you played.
You can switch off this feature if you do not want it.
'PBC'
This line appears only if you insert a VCD.
Using this function, you can activate or deactivate the PBC menu
(Playback Control) of a Video CD. For more information, read section
'Playing a (Super) Video CD' in chapter 'Playback'.
'Finalise disc'
This function allows you to finalise DVD+R discs. If the disc has already
been finalised, this line will appear darker.
'Adapt disc format'
If a DVD+RW has been recorded in a PC drive or a different DVD
recorder, the index screen may not be displayed properly.
This feature allows you to adjust the format of the disc.
Therefore, this feature is only visible if the disc format is different.
User preferences
Disc features
Enter code...
On
63