Night Mode, Remote Control Settings 59 - Philips DVDR1000/171 Owner's Manual

Digital video disc recorder

Hide thumbs Also See for DVDR1000/171:

Software manual (4 pages)

Release note (1 page)

Table Of Contents

Table of Contents

Night Mode

Turn on Night Mode to improve the sound during low volume playback.

Press SYSTEM MENU.

to select it.

Press 9 repeatedly to select

Press 9 repeatedly to select Night mode, then press :.

1en

Digital output

Analog output

Night mode

Press 8 or 9 to select On or Off, then press OK.

Press SYSTEM MENU to remove the menus.

Remote Control Settings

Press SYSTEM MENU.

to select it.

Press 9 repeatedly to select

Press 89 to select Key sound or Remote control used.

Then, press : and follow step 4 according to your choice.

If you selected Key sound, press 89 to select On or Off,

then press OK.

Select On if you want the DVD Recorder to beep each time you

press a key on the remote control or the Recorder. The factory

setting is On. Select Off to disable the sound; the Recorder will be

silent when you press buttons on the remote or the Recorder.

If you selected Remote Control used, press 89 to select

DVD Player or DVD Recorder, then press OK. The factory

setting is DVD Recorder. By selecting DVD Recorder, you will

operate the DVD Recorder with the remote control supplied with

the DVD Recorder (as shown at right and throughout this book).

However, if you have another Philips DVD Player and want to use

that remote to also control the DVD Recorder, you may do so if

you select DVD Player as the Remote Control used.

1en

Key sound

Remote control used

Press SYSTEM MENU repeatedly to remove the menus.