Connection With The Aerial Cable Only - Philips ShowView DVDR 730/00 User Manual

Connection with video (CVBS) cable
This cable, usually with yellow Cinch connectors, is used for
transmitting the Composite Video signal (FBAS, CVBS). In this method
of transmission the colour signal and the brightness signal are
transmitted on the same cable. In certain circumstances, this can lead
to slight problems with the picture, such as 'Moiré' patterns.
1 Insert one end of a video (CVBS) cable into the yellow Cinch
socket VIDEO OUT (CVBS) at the back of the DVD recorder
and the other end into the video input socket (usually yellow) on
the TV set (usually labelled 'Video in' or 'AV in'. See TV operating
instructions).
2 Insert one end of an audio (Cinch) cable into the red/white Cinch
socket AUDIO OUT L/R at the back of the DVD recorder and
the other end into the audio input socket (usually red/white) on
the TV set (usually labelled 'Audio in' or 'AV in'. See TV operating
instructions).
O
Read the next chapter 'Connecting additional devices' on how
to connect additional devices (satellite receivers,
videorecorders,...) to the input-/output sockets.
Then, read the chapter on 'Connecting to the mains'.

Connection with the aerial cable only

To connect this DVD-Recorder to a TV set without external
Audio/Video input sockets, you need a modulator. With the modulator
the audio/video signal is converted in an UHF-channel. This signal can
be received and stored on the TV as a TV-station.
Connecting the DVD recorder
Connecting to the mains
Always check if the local mains voltage matches the voltage range
printed on the type plate at the back or bottom of the DVD-recorder.
If not consult your dealer or the customer support from your country.
1 Switch on the TV set.
2 Insert one end of the supplied mains cable into the mains socket
4MAINS at the back of the DVD recorder and the other end
into the wall socket.
P
The most important features of the DVD recorder will appear
in scrolling text on the display.
After the first installation is completed this function will be
switched off.
Then, read the paragraph on 'Initial installation' in 'Installing your DVD
recorder'.
13