Using A Satellite Receiver - Philips ShowView DVDR 730/00 User Manual

C Check the displayed settings for 'Time', 'Year', 'Month' and
'Date' .
If required select the line using A , B .
O
If required, change the data with the number buttons 0..9 on
your remote control.
Select the line with A or B .
O
À If all informations are correct, save by pressing OK .
The initial installation is now complete.
How to modify the channel settings or the time/date settings you will
red on the following chapter.
a
Sound may be distorted on some TV channels.
b
If the sound is distorted on any of the stored TV channels or if there is no
sound at all, the wrong TV system may have been stored for the TV
channel. Read 'Manual TV channel search' for information on how to
change the TV system.

Using a satellite receiver

TV channels from a satellite receiver (connected to scart socket EXT2
AUX-I/O ) are received on the DVD recorder on programme number
'EXT2'
If necessary, use the MONITOR button to switch to the internal
tuner.
Select programme number 'EXT1' with 0 on the remote control and
then select programme number 'EXT2' with CHANNEL r .
You should select the TV channels to be received by the satellite
receiver directly on the receiver itself.
Installation
19