Programming Recordings Without The Showview System - Philips DVD Recorder Manual

Timer
Timer programming
VPS
Date Prog. Start PDC End
01 BBC1 20:15
Mo-Fr/Weekly
Press SELECT
Programming a recording (TIMER)
Programming recordings without the
ShowView
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press TIMER on the remote control.
The programming method selected last is marked.
3
Select line 'Timer programming' with CH- B or CH+ A . and
confirm with the C button.
Rec
The information will appear on the screen.
Mode
21:30 M1
4
Select the input field with D or C .
5
Enter information with CH- B or CH+ A or with the number
buttons 0..9 .
To store
Selecting daily/weekly recordings
Press OK
In 'Date' use SELECT to select from the following options:
'Mo-Fr': Repeated daily recordings from Monday to Friday
'Mon': Repeated weekly recordings (every week on the same day, e.g.
Monday).
Programme numbers of the 'EXT1' and 'EXT2'scart socket
You can also programme recordings from external sources via scart socket
EXT 1 TO TV-I/O ('EXT1') or EXT 2 AUX-I/O ('EXT2').
'Switching on 'VPS/PDC' in the 'Start' input field
Select the 'Start' input field using TIMER . Using SELECT switch on
'VPS/PDC' ('*' lights up). If you press SELECT again, you will switch
'VPS/PDC' off ('*' goes out).
Changing the recording quality in input field 'End'
Select the 'End' input field using C .
Use SELECT to select the recording mode.
6
If all information is correct, press the OK button. The programming
information is stored in a TIMER block.
7
To end, press TIMER .
8
Insert a DVD (one without write protection).
The disk you have inserted will be checked.
9
Switch off with STANDBY m .
The programmed recording will only function properly if the DVD
recorder has been switched off using the STANDBY m button.
If any of the TIMER blocks are in use, 'TIMER' will light up on the recorder display.
® System
Tip
65