The Remote Control - Philips DVD Recorder Manual

The remote control

MONITOR Monitor: This button lets you switch between the TV receiver (internal
tuner) in the DVD recorder (TV picture on the TV set) and playback on
the DVD recorder.
STANDBY m
Switch on or off: To switch set on or off, interrupt menu function,
interrupt a programmed recording (TIMER)
TV/DVD TV/DVD switch: Switches the scart socket EXT 2 AUX-I/O directly
to the TV set. This lets you watch the picture from any unit connected
to this scart socket (set-top box', video recorder or satellite receiver)
and at the same time record from another source.
If you have not connected a device to the EXT 2 AUX-I/O socket, use
this button to switch between TV reception and the DVD recorder.
But this only works if you use a scart cable to connect the TV set to
your DVD recorder ( EXT 1 TO TV-I/O socket) and your TV set
responds to this switch-over.
T/C Title/Chapter: Choose the '
menu bar
If 'INFO' appears in the display, the index menu from a recorded disc or
an introductory film will be shown. In this case, this function is not
available.
PLAY MODE
Playback type: Choose between repeat, shuffle play and intro-scan
REC MODE Record type (quality): To select the maximum possible record time
0..9 Number buttons: 0 - 9
DISC-MENU
Disc menu: To show the DVD menu or the index screen
SYSTEM-MENU
System menu: Call up/cancel the main menu (menu bar at the top of
the screen)
SELECT Select: Select function/value
OK Store/confirm: To store or confirm entry
D C
Cursor keys : Cursor left, right
CH+ A
Cursor buttons/Plus : Cursor up/ Next programme number
CH- B
Cursor buttons/Minus : Cursor down / Previous programme number
TIMER TIMER: To make a TIMER programming with ShowView
ShowView
FSS &
EDIT: For displaying the edit menu for DVD+R(W) discs, for setting
chapter markers
RETURN
Back: Return to previous menu on a video CD (VCD). This also works
with some DVDs.
CLEAR
Delete: To delete last entry or clear programmed recording (TIMER)
PLAY G
Playback: To play a recorded disc.
B '(Title)/' C
® or to alter or clear a programmed TIMER
'(Chapter) directly from the
® /without