Lining Up Recordings Within A Title (Assemble Cut) - Philips DVD Recorder Manual

Manual recording
The entire disc is now protected.
If an attempt is made to record on a protected disc, 'DISC LOCK' will appear on the display and
'Disc locked' will appear on the screen.
Lining up recordings within a title
(assemble cut)
On a recorded DVD+RW disc you can add another recording to an existing title. This recording
is added to the title as a 'chapter'. The existing information will be overwritten starting from this
point. Titles will also be overwritten that follow the current title depending on the length of the
new recording. The recording type (Quality) will be taken from the current title.
To play back this recording, press SYSTEM-MENU and use the C button to select the 'C'
(Chapter) symbol. You can also use the T/C key.
For further information, see 'Changing to another title/chapter' in 'Playback'.
What happens with DVD+R discs?
New recordings on 'DVD+R' discs can only be added after existing recordings.
It is not possible to overwrite existing recordings on 'DVD+R' discs.
1
In the index display, find the title to which the new recording is to be
added.
2
Look at the last minute of the old recording (playback)
3
Press PAUSE 9 on the remote control at the position where the
new recording is to go. '9' will appear on the screen.
4
To monitor the recording you can press MONITOR to switch to the
internal tuner.
5
Now start recording as usual by pressing REC/OTR n on the
remote control.
The new recording will be inserted.
6
Stop recording with STOP h .
?
49