Programming A Recording Without The Vcr Plus+® System - Philips DVDR615 User Manual

Programming a recording without the
VCR Plus+ ®system
3
4
Switch on the TV. Select the channel number for the DVD
Recorder (channel 3 or 4 or the Audio/Video In channel).
With the Recorder on, press TIMER on the remote control.
The programming method selected last is marked.
Select line 'Timer Programming' using CH- • or CH+ • and
confirm with • .
The information will be displayed.
Select the entry field with _ or • .
Enter information with CH- • , CH+ • or the number buttons
0..9.
In the entry field 'Date', you first enter the month and then the
date.
Timer
Timer Programming
Rec
Date Ch. Start End Mode
01/22 01 08:30AM 10:30AM M1
Mo-Fr/Weekly To store
Press SELECT Press OK
Selecting daily/weekly recordings
In 'Date' use SELECT to select from the following options:
'Mo-FP: Repeated daily recordings from Monday to Friday
'Me': Repeated weeldy recordings (every week on the same day, e.g.
Monday).
Change 'AM/PIVr
Use the SELECT button to select 'AM' or 'P/W in the input fields
'Start' and 'End.
Changing the recording quality
Select the 'RecMode' input field using • .
Use CH- • , CH+ • to select tile recording mode.
If all information is correct, press the OK button. The
information is stored in a TIMER block.
To end, press TIMER.
The disk you have inserted will be checked.
Search the position on the disc where the recording should begin.
Switch off with STANDBY _ .
The programmed recording will only function properly when the
DVD Recorder has been switched off using the
STANDBY © button.
If any of the TIMER blocks are in use, 'TIMER' will light up on the display.
Tip
66 Programming a recording (TIMER)