Connecting Integra/Onkyo Components - Integra DTR-5.9 Instruction Manual

Integra av receiver instruction manual
Hide thumbs Also See for DTR-5.9:
Table of Contents

Advertisement

Connecting Your Components—Continued
Connecting Integra/Onkyo
Step 1: Make sure that each Integra/Onkyo component is connected to the AV receiver with an analog audio cable
(RCA).
Step 2: Make the necessary
Step 3: If you're using an MD, CDR, or RI DOCK component, change the Input Display (see page 46).
With
(Remote Interactive), you can use the following special functions:
Auto Power On/Standby
When you start playback on a component connected via
on and select that component as the input source. Similarly, when the AV receiver is set to Standby, all components
connected via
will also go on Standby.
Direct Change
When playback is started on a component connected via
the input source. If your DVD player is connected to the AV receiver's DVD IN (multichannel input), you'll need to
press the [Multi CH] button repeatedly and select Multich to hear all channels (see page 48), as the Direct Change
function selects the DVD IN FRONT L/R jacks.
Remote Control
You can use the AV receiver's remote controller to control your other
enter the appropriate remote control code first (see page 101). And remember to point the remote controller at the AV
receiver and not the other component.
Notes:
• Use only
cables for
are supplied with Integra/Onkyo players (DVD, CD,
etc.).
• Some components have two
nect either one to the AV receiver. The other jack is
for connecting additional
• Connect only Integra/Onkyo components to
jacks. Connecting other manufacturer's components
may cause a malfunction.
• Some components may not support all
Refer to the manuals supplied with your other Inte-
gra/Onkyo components.
• While Zone 2 is on, the Auto Power On/Standby and
Direct Change
functions do not work.
Components
connections (see illustration below).
connections.
cables
jacks. You can con-
-capable components.
functions.
, if the AV receiver is on Standby, it will automatically turn
, the AV receiver automatically selects that component as
-capable Integra/Onkyo components. You must
REMOTE
CONTROL
e.g., CD player
e.g., DVD player
IN
L
AM
SIRIUS
R
ANTENNA
FM
75
CD
FRONT
L
R
DVD
R
L
ANALOG
AUDIO OUT
R
L
ANALOG
AUDIO OUT
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents