Initialization Of B, D, E, F; Initialization Of D Page Data; Initializing D; Modification Of D - Sony Cyber-shot DSC-P1 Service Manual

1-2. INITIALIZATION OF B, D, E, F, 7 PAGE DATA
1-2-1.

INITIALIZATION OF D PAGE DATA

1. Initializing D Page Data
Note: If the D page data has been initialized, the following
adjustments need to be performed again.
1) Modification of D page data
2) LCD system adjustments
3) Battery end adjustments
Adjusting page
Adjusting Address
Initializing Method:
Order Page Address Data Procedure
1 0 01 01
2 2 03 00
3 2 00 2D
4 2 01 2D
5 2 02
6
2. Modification of D Page Data
If the D page data has been initialized, change the data of the "Fixed
data-2" address shown in the following table by manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the
camcorder may not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of D Page Data:
Order Page Address Data Procedure
1 6 00 29
2 6 01 29
D
10 to EF
Press PAUSE button.
Check the data changes to "01".
Perform "Modification of D
page Data".
Press PAUSE button.

3. D Page Table

Note 1: Fixed data-1: Initialized data.
(Refer to "1. Initializing D Page Data")
Note 2: Fixed data-2: Modified data.
(Refer to "2. Modification of D Page Data")
Address Initial value
00 to 0F
10 00
11 to 16
17
18 to 5D
5E
5F
60,61
62
63
64 to 8F
90 80
91 88
92 AD
93 C2
94 CD
95 to 98
99
9A
9B
9C
9D
9E
9F
A0
A1
A2 to A7
A8
A9 to AC
AD
AE to CF
D0 20 / 20
D1 62 / 58
D2 A0 / A0
D3 88 / 88
D4 D0 / D0
D5 90 / 90
D6 90 / 90
D7 70 / 60
D8 98 / 90
D9
DA
DB,DC
DD 90 / 80
DE
DF to EF
Note 3: LCD TYPE SA / LCD TYPE ST
5-8
Remark
Test mode
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Battery down adj.
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Bright adj. (Note 3)
Color adj. (Note 3)
White balance adj. (Note 3)
Contrast adj. (Note 3)
Black limit adj. (Note 3)
VG center adj.(Note 3)
VCO adj. (NTSC) (Note 3)
V-COM adj. (Note 3)
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
VCO adj. (PAL) (Note 3)
Fixed data-2
Fixed data-1 (Initialized data)