Display Symbols - Electrolux ERF2000 Service Manual

Refrigerator
"0" – "39" steady light:
"0" – "9" steady light:
"2" – "8" flashing light:
"1" – "9" flashing light:
"-" steady light:
"0" steady light:
"-" flashing light:
"H" steady light:
"A" or "SP" steady light:
steady light:
steady light:
"E" steady light:
"P" steady light:
ERF2000 Functions of the electronic boards Rev. 01

6. DISPLAY SYMBOLS

It indicates the average temperature in the refrigerator in
appliances with double display.
It indicates the average temperature in the refrigerator in
appliances with single display.
It appears during the temperature setting operation. It disappears 5
seconds from the end of the temperature setting.
It appears during the temperature setting operation. It disappears 5
seconds after the end of the temperature setting (some Electrolux
models).
It indicates that the refrigerator temperature is higher than 9°C and
the display is single.
It indicates that the refrigerator temperature is between -2°C and
0°C.
It indicates that the refrigerator temperature is lower than -2°C.
It indicates the Holiday function.
It indicates the super cooling function.
Air sensor fault.
Evaporator sensor faulty.
It indicates incompatibility between the electronic boards.
Solution: check the part nos. of the electronic boards.
It indicates an Eeprom error (wrong or not readable parameters).
Solution: replace both electronic boards (power and display).
23/30