Replacing
^ Insert the fine filter on the handle.
^ Press the stoppers back into the
handle (until you feel them click into
position).
^ Push the fine filter back into the
opening in front of the heat
exchanger unit.
When replacing the inner cover,
ensure that the rubber seal fits
correctly into the groove.
^ Replace the cover making sure the
hooks locate correctly. Hold it at an
angle and push it gently downwards.
^ Then turn the lever upwards into the
horizontal position to lock the cover.
^ Replace the service panel and press
the upper edge until it clicks into
position.
,
The cover must be replaced and
locked correctly to ensure that no
water can leak from the heat
exchanger unit.
Cleaning and care
Cleaning the tumble dryer
Disconnect the dryer from the mains
electricity supply.
^ Clean the housing, control panel and
door seal with a slightly damp cloth
and a mild detergent or soapy water.
^ The drum and other stainless steel
parts can be cleaned with a suitable
propietary stainless steel cleaner
following the manufacturer's
instructions.
Do not use solvents, abrasive
cleaners, glass cleaners or
all-purpose cleaners. These could
damage plastic sufaces and other
parts.
^ Dry all parts with a soft cloth.
41