Miele T8002 Product Dimensions
Large capacity vented dryers flat controls, stacked washer & dryer example combination
Hide thumbs
Also See for T8002:
- Operating and installation manual (44 pages) ,
- Technical information (70 pages) ,
- Product dimensions (6 pages)
Advertisement
Quick Links
Product Dimensions
Large Capacity Vented Dryers
Flat Controls
T8002
Location Codes
E -
208/240 Volt, 30 Amp 5 foot molded
plug power supply connects upper right
rear (NEMA 14-30 Configuration).
V-
Venting location may be adjusted to
lower right or left side or lower left rear
(see separate sheet).
• All installations must be done in accordance with local codes
• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
E
V
Notes
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 150607
Advertisement
Related Manuals for Miele T8002
Summary of Contents for Miele T8002
-
Page 1: Product Dimensions
Product Dimensions Large Capacity Vented Dryers Flat Controls T8002 Location Codes 208/240 Volt, 30 Amp 5 foot molded plug power supply connects upper right rear (NEMA 14-30 Configuration). Venting location may be adjusted to lower right or left side or lower left rear (see separate sheet). - Page 2 Product Dimensions Large Capacity Vented Dryer Angled control T8003 / T8005 Location Codes 208/240 Volt, 30 Amp 5 foot molded plug power supply connects upper right rear (NEMA 14-30 Configuration). Venting location may be adjusted to lower right or left side or lower left rear (see separate sheet).
- Page 3 Product Dimensions Large Capacity Condenser Dryers Flat Controls T8012C Location Codes E - 208/240 Volt, 30 Amp 5 foot molded plug power supply connects upper right rear (NEMA 14-30 Configuration). • All installations must be done in accordance with local codes •...
- Page 4 Product Dimensions Large Capacity Condeser Dryer Angled control T8013C Location Codes E - 208/240 Volt, 30 Amp 5 foot molded plug power supply connects upper right rear (NEMA 14-30 Configuration). • All installations must be done in accordance with local codes •...
- Page 5 Product Dimensions Large Capacity Condenser Dryers Flat Controls - Decor unit T8019C Location Codes E - 208/240 Volt, 30 Amp 5 foot molded plug power supply connects upper right rear (NEMA 14-30 Configuration). • All installations must be done in accordance with local codes •...
-
Page 6: Cutout Dimensions
C - Cutout for Electric and Vent/Drain pass-through. Adjust according to duct or drain location. • Needed depth will vary by model number: T8002-T8013C: 24" minimum T8019C: 25" minimum • Typically requires removal of unit's lid. Out of box unit height dimension without lid is 32 5/16"... - Page 7 Product Dimensions Laundry Stand WTS420 - White Only Notes • For use with both large and super capacity washers or tumble dryers. • All installations must be done in accordnace with local codes NOTE: Drawing is not to scale. SPECIFICATION SHEETS 150607...
- Page 8 Product Dimensions Stacked Washer & Dryer Example Combination W3033 + T8002 Location Codes 5 foot flexible drain hose connects upper left rear. E1 - 120 Volt, 15 Amp 5 foot molded plug power supply connects upper left rear (NEMA 5-15 Configuration).
-
Page 9: Panel Information
These units come equipped with a full size white front panel. These units are also designed to either accept a thin insert or a custom front panel supplied by the custom cabinet maker. Sizes are as follows: Miele Decor Laundry unit... -
Page 10: Vented Dryers
Miele appliances. Vent Locations Rear View 3 7/8" Corresponding Dryer Height with NO lid: 32 1/8" - 32 7/8" Corresponding Dryer Height with lid: 33 3/8" - 34 1/8" Vent Duct Calculations Type of Bend or duct Flexible duct 90°... - Page 11 Vent Locations Stacked Washer & Dryer Example Combination Vent Locations Left Side View Rear View Right Side View 4 3/4" 3 7/8" 4 3/4" Stacking Kit Stacking Kit Stacking Kit Corresponding Total Height with lid: 66 3/8" - 67 1/8"...