Miele T 8000 WP SUPERTRONIC Operating Instructions Manual page 8

Heat pump tumble dryer
Hide thumbs Also See for T 8000 WP SUPERTRONIC:
Table of Contents

Advertisement

Warning and Safety instructions
~
Faulty components must only be
replaced by genuine Miele original
spare parts. Only when these parts are
fitted can the safety standards of the
tumble dryer be guaranteed.
~
If the connection cable is faulty it
must only be replaced by a Miele
approved service technician to protect
the user from danger.
~
In the event of a fault or for cleaning
purposes, the tumble dryer is only
completely isolated from the electricity
supply when:
– it is switched off at the wall socket
and the plug is withdrawn, or
– it is switched off at the mains, or
– the mains fuse is disconnected, or
the screw-out fuse is removed (in
countries where this is applicable).
~
This tumble dryer may only be used
in mobile installations such as ships if a
risk assessment of the installation has
been carried out by a suitably qualified
engineer.
~
Do not make any alterations to the
tumble dryer, unless authorised to do
so by Miele.
~
In countries where there are areas
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
tumble dryer and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents