Operating Instructions - Kärcher K 5.65 Operator's Manual

Connect the high pressure hose to
the trigger gun
STEP 8:

Insert one end of the high pressure
hose into the trigger gun until it locks
audibly.
Note: Make sure the connection nip-
ple is aligned correctly. Check the
connection by pulling on the high
pressure hose.
STEP 1:

Connect the high pressure hose to
the unit's high pressure outlet.
STEP 2:

Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.

OPERATING INSTRUCTIONS

Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
Press the disconnect key on the trig-

ger gun and remove the high pres-
sure hose from the trigger gun.
STEP 3:

Install the supplied connector to the
unit's water inlet.
STEP 4:

Screw the supplied garden hose con-
nector on to the end of your garden
hose.
English 7