Kärcher K 5.65 Operator's Manual page 8

STEP 5:

Push the garden hose connector on
to the water inlet connector and
make sure you hear it click into place
before proceeding.
STEP 6:

Connect garden hose to the cold wa-
ter source and turn water on com-
pletely.
STEP 7:

Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a receptacle.
Press RESET button, indicator
should be "ON".
Press TEST button, indicator should
be "OFF".
Press RESET button for use.
We recommend that you test the GFCI as
part of your startup procedure each time
you use your pressure washer. To learn
how to peform this test on your unit, visit
http://www.karcherresidential.com/
gfci_test.php for detailed instructions for
your type of GFCI.
WARNING
Do not use if above test fails.
8 English
STEP 8:

Unlock the trigger gun safety lock.
Trigger the gun to eliminate trapped
air, wait for a steady flow of water to
emerge from the spray nozzle.
STEP 9:

Turn on the high pressure washer (I/
ON).
The motor starts only if the trigger
of the gun is pulled and shuts off
when the trigger is released.