O Group: Operator - opti-solar SC-50 Installation And Operation Manual

F-02: Parallel Addr
A OPTI-Solar SC MPPT Series assigned as Master or Standalone is always
addressed 01 automatically so the address assignment in F-02 is only available for
the slave units.
The maximum slave address number is 16 and the factory setting is 2.
O-01: Set CLOCK Mode
This is the same display as in the initialization setup of battery.
Use Constant O-01 to change and select the hour format displayed between 12
Hour and 24 Hour. Factory setting is 12 Hour Format.
When 12 Hour is selected, AM and PM indication will be shown in O-02.
O-02: Set Time
This is the same display as in the initialization setup of battery.
When 12 Hour format is selected in O-01, AM and PM indication will be shown.
Press ENTER to start to edit the Hour:Minute: Second number and press UP and
DOWN key to increment or decrement the values.
O-03: Set Date
This is the same display as in the initialization setup of battery.
Press ENTER key to start to edit the MM/DD/YY and press UP and DOWN key
to increment or decrement the values.
O-04: Model Number
The model number of the unit is displayed.
O-05: Turn OFF Backlight T
Use Constant O-05 to set the operation of the LCD backlight. Since the backlight
Group O
Operator
5-13