opti-solar SC-50 Installation And Operation Manual page 38

U-07: EnergyHarvest Today 2
This screen displays how much time the charger was in Float mode "Today" in
Hour:Minute.
U-08: Stage of Charger
This screen displays the charging stage of OPTI-Solar MPPT. The possible values
are Charger Off, Charger Start, BULK Stage, ABSORP Stage, FLOAT Stage,
Charger MPPT, Charger Stop, EQUALZ Stage.
U-09: Date
This screen displays the date according to the setting of initialization stage. The
display format is MM/DD/YY.
U-10: Time
This screen displays the time according to the setting of initialization stage.
U-11: Temperature
This screen displays the temperature detected in OPTI-Solar MPPT Battery Charger.
U-12: Battery SOC
This screen displays the stage of charge (SOC) as a percentage of fully charged.
SOC will only be visible when terminal BVS (Battery Voltage Sensing) is
connected to the battery and will only be active when using an optional
50mv/500amp external shunt.
U-12 will only be displayed when the terminal BVS (Battery Voltage Sensing)
is wired to the battery. To show the precise values, an optional 50mv/500amp
external shunt is needed.
U-13: Battery Current
This screen displays the battery current in Amps. Battery Current will only be
visible when terminal BVS (Battery Voltage Sensing) is connected to the battery
5-2