Subscribe to Our Youtube Channel
Related Manuals for King Canada KC-702C
Summary of Contents for King Canada KC-702C
- Page 1 1˝ x 30˝ BELT & 5˝ DISC SANDER MODEL: KC-702C INSTRUCTION MANUAL COPYRIGHT © 2001 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
- Page 2 Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, repairs or alterations and lack of maintenance. KING CANADA shall in no event be liable for death, injuries to persons or property or for incidental, special or consequential damages arising from the use of our products.
-
Page 3: General Safety Instructions For Power Tools
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOLS 1. KNOW YOUR TOOL 12. ALWAYS WEAR SAFETY GLASSES. Read and understand the owners manual and labels affixed to Always wear safety glasses (ANSI Z87.1). Everyday the tool. Learn its application and limitations as well as its eyeglasses only have impact resistant lenses, they are NOT specific potential hazards. -
Page 4: Specific Safety Instructions
SPECIFIC SAFETY INSTRUCTIONS & ELECTRICAL INFORMATION The combination of wood dust and metal filings can create a Do not sand pieces that are too small to be held onto securely. fire hazard. Before the machine is used for shaping metal Always hold the work firmly when sanding, and do not products, make sure there are no wood dust deposits inside attempt any freehand operations. - Page 5 ASSEMBLY Warning! Do not plug this sander into the wall outlet or attempt to operate until it is completely assembled. BELT TABLE ASSEMBLY 1) Slide the belt and platen through the belt table. 2) Insert hex. hd. bolt (A) through the hole in the sander and the slot in the underside of the table, as shown in figure 2.
-
Page 6: Operation
OPERATION REMOVING OR INSTALLING SANDING BELT 1) Remove the lock knob from the top of the side cover and the screw below the belt table, then remove the entire cover. 2) Pull the tracking knob (A-Fig.6) towards the front of the sander to release the belt tension.
Need help?
Do you have a question about the KC-702C and is the answer not in the manual?
Questions and answers