Download Print this page
Monte Carlo Fan Company 3KNR52XXD Series Owner's Manual And Installation Manual
Monte Carlo Fan Company 3KNR52XXD Series Owner's Manual And Installation Manual

Monte Carlo Fan Company 3KNR52XXD Series Owner's Manual And Installation Manual

Advertisement

Quick Links

Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3KNR52XXD Series Fan
RETAILER NAME:
RETAILER ADDRESS:
UL Model NO. : 52SGR-L
11.6 kgs
25.52 lbs
Total fan weight with light

Advertisement

loading
Need help?

Need help?

Do you have a question about the 3KNR52XXD Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Monte Carlo Fan Company 3KNR52XXD Series

  • Page 1 Owner’s Guide and Installation Manual 3KNR52XXD Series Fan UL Model NO. : 52SGR-L Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 11.6 kgs...
  • Page 2: Cautions And Warnings

    All set screws must be checked, and re-tightened where necessary, before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 10/1/2013...
  • Page 3 Place fan housing over motor assembly. Partially loosen downrod set screws from Place downrod over canopy, canopy yoke at top of motor assembly. cover and yoke cover Remove preassembled keeper pin and cross pin from downrod. © 2013 Monte Carlo Fan Company 10/1/2013...
  • Page 4 House. Make sure that no filaments are Note : If Installing The Secondary Support outside of the wire connectors. Safety Cable in the U.S., Do Not Remove Insert the remote receiver into mounting Knockouts In The Outlet Box. bracket. © 2013 Monte Carlo Fan Company 10/1/2013...
  • Page 5 Reinstall the screw removed in step 17. Tighten all screws securely. © 2013 Monte Carlo Fan Company 10/1/2013...
  • Page 6 Place remote machine screws provided. screws provided. Snap battery cover in over 2 pins on front cover. Attach cover place of remote by placing over 4 pins and snapping into place. © 2013 Monte Carlo Fan Company 10/1/2013...
  • Page 7 “light dimmer”. The light will cycle from bright to dim to bright until button is released. Light will maintain last setting if turned off. Note: If not using for long periods of time, remove battery to prevent damage to remote transmitter, and store the remote transmitter away from excess heat or humidity © 2013 Monte Carlo Fan Company 10/1/2013...
  • Page 8: Troubleshooting

    Trouble Shooting Warning Trouble Suggested Remedy CAUTION CAUTION CAUTION © 2013 Monte Carlo Fan Company 10/1/2013...
  • Page 9 Oct.2013...