Day/Night Mode - Bryton Rider 50 User Manual

NOTE:
When you see "--" in a grid, it means the sensor is inactive. To activate the sensor,
refer to "Sensors" on page 30-33.

Day/Night mode

4. Move the 5-way navigator up/down to
select the item setting, and press the
center to confirm.
Move the 5-way navigator right/left to
the next / previous page of the list.
5. Move the 5-way navigator up/down to
select the desired setting.
6. When finished, press the center of the
5-way navigator to confirm.
1. In the Settings menu, use the 5-way
navigator to select Grid Display > Day/
Night mode.
2. Move the 5-way navigator up/down to
select the desired setting and press the
center to confirm.
• Auto Day/Night Mode: automatic
adjust the backlight brightness.
• Day Mode: color scheme for day vision.
• Night Mode: color scheme for night
vision.
Settings 29