Wireless Network; Configure The Wireless Settings; Windows Only - Brother MFC-9320CW Quick Setup Manual

Wireless Network

Configuration using the Installation CD-ROM and temporarily using a USB cable
®
(Windows only)
17
Configure the wireless
settings
IMPORTANT
You need to temporarily use a USB cable
during configuration (cable not included).
a
Put the installation CD-ROM into your CD-ROM
drive. If prompted, select your model and language.
Note
If the Brother screen does not appear automatically,
go to My Computer (Computer), double-click the
CD-ROM icon, and then double-click start.exe.
b
Click Initial Installation and then Install
MFL-Pro Suite.
c
Click Yes if you accept the license agreement.
Follow the on-screen instructions.
d
Choose Wireless Network Connection and
then click Next.
Note
For Windows Vista
User Account Control screen appears, click
Allow or Yes.
30
® ®
and Windows 7, when the
e
®
For Windows XP SP2 or greater/XP
Professional x64 Edition/ Windows Vista
®
Windows 7 users, when this screen appears,
choose Change the Firewall port settings to
enable network connection and continue
with the installation. (Recommended) and
click Next.
If you are not using the Windows
the user's guide of your firewall or antivirus
software for information on how to add the
following network ports.
 For network scanning, add UDP port 54925.
 For network PC-Fax receiving, add UDP port
54926.
 If you still have trouble with your network
connection, add UDP port 137.
f
Choose Use your computer or the control
panel directly and click Next.
g
Choose Temporarily use a USB cable
(Recommended) and then click Next.
®
Windows
®
/
®
Firewall, see