Table of Contents
Advertisement
∫ Attaching the microphone holder
≥ Attach by using a commercially available screw driver.
≥ When attaching an external microphone (optional) to the microphone holder attachment part, use
the supplied microphone holder and microphone holder adaptor.
≥ The microphone holder is set up so that a 21 mm (0.83 q) external microphone (AG-MC200G:
optional) can be attached. Check in advance whether the microphone you wish to use can be
attached.
≥ When attaching the microphone holder and the microphone holder adaptor, be sure to tighten the
screws firmly even though you might hear a squeaking sound.
≥ When wiring the microphone cable, use the cable clamper of the microphone holder adaptor.
∫ Attaching the tripod
≥ There are tripod mounting holes that are compatible
with 1/4-20UNC and 3/8-16UNC screws. Use the size
that matches the diameter of the tripod's fixing screw.
≥ Attaching a tripod with a screw length of 5.5 mm
(0.22 q) or more may damage the unit.
Microphone holder attachment part
A
Microphone holder adaptor
B
External microphone (optional)
C
Microphone holder screws (6 mm
D
(0.24 q))
Microphone holder
E
Microphone holder screws (12 mm
F
(0.47 q))
G Cable clamper
H Microphone holder adaptor
A Tripod receptacle
- 9 -
Advertisement
Table of Contents
