Table of Contents
Advertisement
Recording
Useful functions
Quick Start
1
Press and hold down the QUICK START
button until the display on the LCD monitor/
viewfinder disappears.
The quick start lamp E flashes green and the unit goes into
Quick Start Standby Mode.
2
Press the QUICK START button.
The quick start lamp E goes off and the unit is put into
recording pause about 0.6 seconds.
≥ When in Quick Start Standby Mode about 80% of the power used in recording pause mode
is being consumed, so the recording time will be reduced.
≥ This unit is turned off after approximately 30 minutes elapse in Quick Start Standby Mode.
≥ Quick Start Standby Mode is cleared when the mode switch is set to
≥ Depending on the recording conditions and menu settings, time for Quick Start may be longer
than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approximately 1k.
DISP/MODE CHK
ZEBRA
QUICK START
BARS
DISP/MODE CHK button
A
ZEBRA button
B
QUICK START button
C
BARS button
D
- 61 -
.
Advertisement
Table of Contents
