Carson manufacturing company, inc. siren specification sheet (2 pages)
Summary of Contents for Carson SA-400-85 600V
Page 1
OPERATING MANUAL SA-400-85 600V Carson is a trademark of Carson Manufacturing Company, Inc. Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
Page 2
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit and may void warranties. SAFETY PRECAUTIONS For the safety of the installer, operator, and the community please observe the following safety precautions.
ELECTRICAL CONNECTIONS Disconnect battery before making any electrical connections. The power supply for the amplifier must be capable of delivering peak currents up to 50 amps for adequate short circuit protection and reliable operation. The preferred source is directly at the battery. A fuse on the unit protects from overload.
OPERATION Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910.95 for occupational noise exposure guidelines) SA400 RADIO SIREN...
Page 6
Try adjusting the internal radio volume control. RETURN If you have any questions concerning this or any other Carson product, please contact our Technical Service Department at (888) 577-6877. Many issues can be handled over the phone. We can also be reached via e-mail at service@carsonsirens.com...
Page 7
PARTS SA400 RADIO SIREN HORN WAIL YELP PHASER Item Part # Description CP3687 Bezel, front panel for SA-400-85 CP3966 Bolt, mounting, 1/4-20 X 3/8 (2 required) CP3571 Bracket, mounting 8025 DRS/CAP Button, red w/ dress nut (C&K #801803000 Cap, #702501201 Nut) (for pushbutton switch) CP3883 Cable, internal chassis plug wiring harness CP2560...
Need help?
Do you have a question about the SA-400-85 600V and is the answer not in the manual?
Questions and answers