Advertisement
SA-400-63 PG (Positive GND)
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
TB0321B
All manuals and user guides at all-guides.com
Carson Manufacturing Co., Inc.
Phone: (888) 577-6877
TECHNICAL BULLETIN
MAN WAIL
YELP
HORN
RADIO
PHASER
INSTALLATION AND
OPERATING MANUAL
SA-400-63 14V
SA-400-63 28V
Carson is a trademark of Carson Manufacturing Company, Inc.
5451 North Rural Street
Indianapolis, IN 46220
Fax: (317) 254-2667
www.carsonsirens.com
P.A. VOLUME
SIREN
LO
ON
OFF
Page 1 of 8
HI
SA400
10/18/03
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Carson SA-400-63 12V
Summary of Contents for Carson SA-400-63 12V
- Page 1 SA-400-63 28V SA-400-63 PG (Positive GND) Carson is a trademark of Carson Manufacturing Company, Inc. Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
-
Page 2: Input Power
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. -
Page 3: Installation
All manuals and user guides at all-guides.com INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties. -
Page 4: Wiring Harness Conne C Tions
All manuals and user guides at all-guides.com ELECTRICAL CONNECTIONS Disconnect vehicle battery before making any electrical connections. Electrical connections to the amplifier are made using the wiring harness supplied. If the amplifier needs service the connector can be easily removed without unwiring the harness. The power supply for the amplifier must be capable of delivering peak currents up to 50 amps for adequate short circuit protection and reliable operation. -
Page 5: Operation
All manuals and user guides at all-guides.com OPERATION Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910.95 for occupational noise exposure guidelines) P.A. -
Page 6: Radio Volume Adjust
All manuals and user guides at all-guides.com RADIO VOLUME ADJUST The RADIO VOLUME ADJUST is a one time setting which depends on the radio connected and its normal volume. The siren cover must be removed to access the adjustment. The cover is held in place by a snap-fastener on the back of the unit. - Page 7 Try adjusting the internal radio volume control. RETURN If you have any questions concerning this or any other Carson product, please contact our Technical Service Department at (888) 577-6877. Many issues can be handled over the phone. We can also be reached via e-mail at service@carsonsirens.com...
- Page 8 Microphone clip with mounting screws ES00004-06 Switch, pushbutton assembly siren (Switch alone is Switchcraft #LUS001, Cap #P2349-1) 2FA53-73 Switch, toggle power (Carling Switch #2FA53-73) CP2744 Switch, rotary function 2N5884 Transistor, output (2 required) (Motorola #2N5884 or Carson #CP2742) TB0321B Page 8 of 8 10/18/03...
Need help?
Do you have a question about the SA-400-63 12V and is the answer not in the manual?
Questions and answers