Revo 4 Channel Digital Video Recorder User Manual page 15

REVO EZLink Setup I
 DVR Name: Enter the DVR name to be registered on the
DVRNS (DVR Name Service) server.
 Test: Select the box to check whether or not the name you
entered can be used and test whether or not the REVO EZLink
Service is working properly.
NOTE: The DVR name you entered should be checked by
selecting Test, otherwise the REVO EZLink Service changes
will not be saved.
NOTE: When entering no name or a name already registered
on the DVRNS server, an error message displays.
REVO Dashboard Setup I
Select the Next button to start the Dashboard Setup.
REVO Dashboard Setup II
Select New account if you want to create a new Dashboard
account, and select Existing account if you want to use your
existing Dashboard account.
REVO Dashboard Setup III
Enter the User ID and Password for your Dashboard account.
And then register the DVR you want to access by entering the
DVR name and selecting the Register/Add a new DVR
button.
4 Channel Digital Video Recorder
9