Front Panel View; Turning On The Power - Revo 4 Channel Digital Video Recorder User Manual

FRONT PANEL VIEW

LCD Panel
The LCD panel displays live or recorded video on the screen.
LED
The red LED is lit when the unit is On.
The orange and red LED flickers alternately when the DVR is recording or searching video on the hard disk drive.
The red LED flickers while in the screen saving mode.
Infrared Sensor
The infrared sensor on the DVR receives the remote control's signal.
NOTE: Make certain that nothing blocks the infrared sensor, or the remote control will not function properly.
NOTE: When you use wireless communication devices (such as Wi-Fi or Bluetooth) near the DVR, the remote
control might not function properly.

TURNING ON THE POWER

Connecting the power cord to the DVR turns on the unit. The unit will take approximately 30 seconds to initialize.
As soon as the DVR's initialization process completes, the DVR will begin displaying live video on the attached monitor
and playing live audio through the built-in speaker.
When you turn the system on for the first time, you will be asked to select the startup
language. Select the desired language and then click the OK button.
NOTE: You can change the language during System setup. Refer to the
Advanced Setup section of this chapter.
4 Channel Digital Video Recorder
LCD Panel
LED
Infrared Sensor
5