Connect The Wiring - Kenmore 233.5580 Series Use & Care / Installation Manual

WARNING: To reduce the risk of electric
shock, make sure power is switched off at
the service panel. Lock or tag service panel
to prevent power from being switched on
accidentally.
1. Connect House Wiring (120 VAC) to hood. Use
a piece of Cardboard to protect the cooktop, if
necessary.
OPTION
A Cord Kit is available - which enables the hood
to plug into a standard 120 VAC wall outlet.
See page 4 for Cord Kit information.
Cord Kit available by calling Sears
at 1-800-4-MY-HOME
Use only with range hood cord-connection
!
kits that have been investigated and found
acceptable for use with this model range
hood.
2. Connect house black to hood black wire, house white
to hood white wire, and house ground under Green
Ground Screw. Securely tighten cable clamp onto
house wiring.
3. Replace wiring cover.

CONNECT THE WIRING

®
9
GREEN
GROUND
SCREW