Connect The Wiring - Kenmore 51262 Use & Care / Installation Manual

WARNING: Risk of electric shock. Electrical wiring
must be done by qualifi ed personnel in accordance
with all applicable codes and standards. Before
connecting wires, switch power off at service
panel and lock service disconnecting means to
prevent power from being switched on accidentally.
1. Connect House Power Cable to range hood wiring: BLACK
to BLACK, WHITE to WHITE and GREEN or bare wire
under GREEN ground screw.
2. Reinstall wiring cover and attach it to the hood using its
retaining screw.
CAUTION: Ensure both tabs on inner top of hood are
!
engaged in their corresponding slots in wiring cover.
Also, take care not to pinch wires while reinstalling
wiring cover.

CONNECT THE WIRING

14
HOUSE
POWER
CABLE
SCREW
MOTOR
GROUND
WIRE
GROUND
SCREW
TABS ON
INNER TOP
OF HOOD
ENGAGED IN
WIRING
COVER SLOTS.