GE SBSD227F Use And Care Manual page 41

Dryers
Hide thumbs Also See for SBSD227F:
Table of Contents

Advertisement

Available languages

Available languages

LAUNDRY PRACTICES
Clothes are wrinkled
Clothes shrink
Greasy spots on clothes
Lint on clothes
Static occurs
Collars and waistbands
still wet at end of cycle
Possible Causes
Overdrying
Letting items sit in dryer after
cycle ends
Overloading
Some fabrics will naturally
shrink when washed. Others
can be safely washed, but will
shrink in the dryer
Improper use of fabric softener
Drying dirty items with clean
ones
Clothes were not completely
clean
Lint filter is full
Improper sorting
Static electricity can attract lint
Overloading
Paper, tissue, etc., left in pockets
No fabric softener was used
Overdrying
Synthetics, permanent press
and blends can cause static
The dryness monitor senses
that the body of the clothes is
dry
What To Do
• Select a shorter drying time.
• Remove items while they still hold a slight amount of
moisture. Select a LESS DRY or DAMP setting.
• Remove items when cycle ends and fold or hang
immediately, or use the EXTEND TUMBLE option.
• Separate large loads into smaller ones.
• To avoid shrinkage, follow garment care labels exactly.
• Some items may be pressed back into shape after drying.
• If you are concerned about shrinkage in a particular item,
do not machine wash or tumble dry it.
• Follow directions on fabric softener package.
• Use your dryer to dry only clean items. Dirty items can
stain clean items and the dryer
• Sometimes stains which cannot be seen when the
clothes are wet appear after drying. Use proper washing
procedures before drying.
• Clean lint screen before each load.
• Sort lint producers (like chenille) from lint collectors (like
corduroy).
• See suggestions in this section under STATIC.
• Separate large loads into smaller ones.
• Empty all pockets before laundering clothes.
• Try a fabric softener.
• Bounce
Fabric Conditioner Dryer Sheets have been
®
approved for use in all GE Dryers when used in accordance
with the manufacturer's instructions.
• Try a fabric softener.
• Adjust setting to LESS DRY or DAMP.
• Try a fabric softener.
• Choose SPEED DRY or TIMED DRY to dry damp collars and
waistbands. In the future, when drying a load with collars
and waistbands, choose MORE DRY.
www.GEAppliances.ca
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sbsd107hSbsd137h

Table of Contents