Estimated Time Remaining - GE SBSD227F Use And Care Manual

About cycle options
NOTE: Not all features are available on all dryer models.
26
Control
You can lock the controls to prevent
any selections from being made. Or
you can lock the controls after you
have started a cycle.
Children cannot accidentally start
the dryer by touching pads with this
option selected.

Estimated Time Remaining

Displays the approximate time
remaining until the end of the cycle.
As the cycle begins, you will see an
initial approximate total cycle time in
the display. Then lights will "race" in
the display. This means the dryer is
continuously monitoring the amount
My Cycle
(on some models)
To save a favorite cycle, set the
desired settings and hold down the
MY CYCLE button for 3 seconds. A
beep will sound to indicate the cycle
has been saved.
To use your custom cycle, press the
MY CYCLE button before drying a
load.
To lock the dryer, press and hold the lock icon
for 3 seconds. To unlock the dryer, press and
hold the lock icon for 3 seconds.
The icon of the lock next to the timer will light
up when the controls are locked.
of moisture in the load. The lights will continue
until the dryer senses a low level of moisture in
the load. At that point, the dryer will calculate
and display the approximate time remaining.
To change the saved cycle, set the desired
settings and hold down the MY CYCLE button
for 3 seconds.
See page 24 for more details.