GE SBSD227F Use And Care Manual page 32

Reversing the door swing (cont.)
REINSTALL HINGE ASSEMBLY
4
Place the hinge assembly in the opposite side of the door.
Align the hinge holes with the door holes.
Loosely fasten the hinge assembly to the edge using 2
machine screws (#8).
Hold the door on its side with one hand and fasten the
remaining 2 screws as shown. Then tighten the 2 screws
(#8) holding the hinge assembly.
32
REINSTALL NUTS AND HINGE COVER
5
Place the door on its edge. Assemble the 2 machine
screws (#8), washers and nuts. Tighten using a wrench
and screwdriver.
Place the hinge cover in position. Align the hinge cover
holes with the holes in the door.
Secure the hinge cover with the 2 tapping screws (#8).