Mobile Home Requirements - Travis Industries Lopi Answer Owner's Manual

Lopi answer wood stove owner's manual
Hide thumbs Also See for Lopi Answer:
Table of Contents

Advertisement

14
Stove Installation

Mobile Home Requirements

Outside air must be installed - see "Outside Air Requirements" on page 12
Chimney connector and chimney must be one of the following types:
AMERI-TEC model DCC with model HS chimney
DURAVENT model DVL with DURATEC or DURA-PLUS chimney
GSW Super Chimney Twenty-One connected directly to appliance
I.C.C. Excel (2100-2 Can.) (103-HT USA) chimney with HP connector
METALFAB model DW connector with TG chimney
OLIVER MACLEOD PROVENT model PV connector with model 3103 chimney
SECURITY model DP connector with SECURITY model ASHT or S2100 chimney
SELKIRK METALBESTOS model DS connector with model SSII chimney
Standard Masonry Chimney with any one of the above listed connectors
NOTE: Reduced clearance connectors may not connect to the flue collar – an appliance adapter may be required.
Stove placement must maintain the following clearances to combustibles (drywall, furniture, etc.)
Minimum Clearance
(See the illustration above)
A
B
C
D
E
F
If using offsets, use the connector clearance listed in Figure 9, not the
connector manufacturer's clearance.
The appliance must be secured to the floor (consult your building official).
Secure the outside air boot to the floor and stove to insure the stove does
not dislocate.
Mobile home installations require a spark arrester at the chimney
termination.
The appliance must be grounded to the chassis of the mobile home
(consult your building official).
WARNING:DO NOT INSTALL IN SLEEPING ROOM.
CAUTION:THE STRUCTURAL INTEGRITY OF THE MOBILE HOME
FLOOR, WALL, AND CEILING/ROOF MUST BE MAINTAINED.
© Travis Industries
Straight Installations
d
e
a
b
NOTE:
Measure clearances to the stove top.
Sidewall to stove
Backwall to stove
Cornerwall to stove
Connector to sidewall
Connector to backwall
Connector to cornerwall
(for qualified installers only)
Corner Installations
Reduced Clearance
Connector
13"
9"
7.5"
21.5"
11.5"
16.5"
100-01332
f
c
331mm
229mm
191mm
547mm
293mm
420mm
12" Min.
Connector Clearance
(as outlined above)
Stove Clearance
(as outlined above)
Figure 8
Figure 9
4121214

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lopi answer nd

Table of Contents