The Diagnostic Test - Toshiba Tecra A6 Maintenance Manual

3.1The Diagnostic Test

3.1 The Diagnostic Test

This chapter explains how to use the Test & Diagnostic program to test the functions of the
(Base on Cleveland10 T&D version 1.0) hardware modules. The Test & Diagnostic Program is
stored on the T&D diskettes. The program consists of a series of tests that run automatically
when the Diagnostics Program items are selected and executed.
NOTES: To start the diagnostics, follow these steps
1. Check all cables for loose connections.
2. Exit this program when you are at Main Menu.
The TEST & DIAGNOSTIC PROGRAM contains the following functional tests:
CONFIG CHECK TEST
DMI CHECK TEST
SPEAKER AUDIO TEST
FAN ON/OFF TEST
MAIN BATTERY CHARGE TEST
FDD TEST
ODD TEST
KEYBOARD TEST
MOUSE(PAD) TEST
LCD PIXELS MODE TEST
MAGNETIC SWITCH TEST
HDD R/W TEST
LAN TEST
RTC TEST
IEEE1394 CODE TEST
Speaker EQ Check&Rewrite
Button Test
Fingerprint DOS Test
3D G-Sensor Test
Clear FP(Fingerprint) Registered
You will need the following equipment to perform some of the Diagnostic test programs.
The diagnostics diskette (2 pcs)
A formatted working diskette for the floppy disk drive test (Floppy Disk Drive Test)
A data CD disc (ODD Test)
The following sections explain how to execute the Test & Diagnostic Program and detail the
tests within the program.
Satellite M100/TECRA A6 Series Maintenance Manual
3. Tests and Diagnostics
3-3