Page 2 © 2006 by TOSHIBA Corporation. All rights reserved. Under copyright law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
Page 3: Safety Instructions
Centronics is a registered trademark of Centronics Data Computer Corporation. Photo CD is a trademark of Eastman Kodak. Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license. iLINK is a trademark of Sony Corporation. Other trademarks and registered trademarks not listed above may be used in this manual.
Page 4 TECRA A6 Series ■ Place the AC adapter in a ventilated area, such as a desk top or on the floor, when you use it to run the computer or to charge the battery. Do not cover the AC adapter with papers or other items that will reduce cooling;...
Page 5 To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Use only the battery pack that came with the computer or an optional battery pack. Use of the wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. User’s Manual...
Page 6 EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected / implemented those options / cables have to provide assurance that the system (PC plus options / cables) still fulfils the required standards.
Page 7 CD-RW/DVD-ROM GCC-4244 Panasonic Communications Co., LTD. DVD Super Multi UJ-850B Hitachi LG Data Storage, Inc. DVD Super Multi GMA-4082N Pioneer DVD Super Multi DVR-K16TBS TOSHIBA Samsung Storage DVD-ROM SDC 2732 Technology TEAC DVD Super Multi DV-W28EB DVD Super Multi ND-7550...
Page 8 TECRA A6 Series International precautions ■ This drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■...
Page 9 TECRA A6 Series VORSICHT: Dieses Gerät enthält ein Laser- System und ist als „LASERSCHUTZKLASSE 1 PRODUKT“ klassifiziert. Für den richtigen Gebrauch dieses Modells lesen Sie bitte die Bedienungsanleitung sorgfältig durch und bewahren diese bitte als Referenz auf. Falls Probleme mit diesem Modell auftreten, benachrichtigen Sie bitte die nächste „autorisierte Service-Vertretung“.
Page 10: General Precautions
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.
Page 11 TECRA A6 Series Stress injury Carefully read the Instruction Manual for Safety and Comfort. It contains information on prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use. Chapter 3, Getting Started, also includes information on work space design, posture and lighting that can help reduce physical stress.
Page 12: Working Environment
Any consequences resulting from the use of this product in working environments that are not approved or the use is restricted are not the responsibility of Toshiba Corporation. The consequences of the use of this product in those working environments may be: ■...
Page 13: Wireless Lan And Your Health
Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Page 14: Usage Restrictions
TECRA A6 Series Usage Restrictions Do not use the Wireless Products for controlling the following equipment: ■ Equipment directly linked with human life corresponding to the following. ■ Medical equipment such as life support systems, equipment used in operations, etc. ■...
Page 15 TECRA A6 Series Warning Turn OFF the Wireless Communication switch of wireless products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22 cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles.
Page 16: Table Of Contents
Table of Contents TECRA A6 Features Chapter 1 Features..........1-1 Special features .
Page 17 DLA for TOSHIBA ........
Page 18 TOSHIBA support ........
Page 19 Preface Congratulations on your purchase of the TECRA A6 computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your TECRA A6 computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
Page 20 Chapter 6, Power and Power-Up Modes, gives details on the computer's power resources. Chapter 7, Setup, introduces you to the TOSHIBA Hardware Setup program. Chapter 8, Optional Devices, describes the optional hardware available. Chapter 9, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn't seem to be working properly.
Page 21: Equipment Checklist
TECRA A6 Series Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, Ctrl + C means you must hold down Ctrl and at the same time press C.
Page 22 ■ TOSHIBA Supervisor Password ■ TOSHIBA Touch and Launch ■ Bluetooth Stack for Windows by Toshiba (depending on model purchased) ■ Product Recovery disc The system may not function properly if you use drivers that are not preinstalled or distributed by TOSHIBA.
Page 23: Chapter 1 Tecra A6 Features
This chapter identifies the computer's special features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Features The TECRA A6 Series computer uses TOSHIBA's advanced Large Scale...
Page 24: Chip Set
TECRA A6 Features Chip Set ® Intel 945PM Express Chipset or ® Intel 945GM Express Chipset Realtek 861 Audio codec TI PCI7412 for Multiple Digital Media Card Slot, IEEE 1394 and PCMCIA controller. ® Intel 82562GZ for 10/100Mbps LAN controller ®...
Page 25 TECRA A6 Features Video RAM Depending on the model you purchased: Up to 128 MB integrated solution and shared with ® main memory for Mobile Intel 945GM Express Chipset. 128 MB or 256 MB TurboCache™ (64 MB or 128 MB for local cache) with NVIDIA ®...
Page 26 TECRA A6 Features Power Battery Pack 6-cell Lithium Ion smart battery pack with 43.2 watt capacity (10.8V/4000mAH) or 9-cell Lithium Ion smart battery pack with 64.8 watt capacity (10.8V/6000mAH) or 12-cell Lithium Ion smart battery pack with 92.88 watt capacity (10.8V/8600mAH). (Battery type depends on the model purchased.) Approximately 12 hours or longer charging time to 100% battery capacity with system switched on.
Page 27 TECRA A6 Features Disclaimer (LCD) For more information on the Disclaimer regarding LCD, please refer to the Chapter 10, Disclaimers. ® Graphics controller ATI Mobility™ Radeon X1400 NVIDIA Quadoro NVS 110 (Graphics controller chipset depends on the model purchased) The graphics controller maximizes display performance.
Page 28 TECRA A6 Features Disclaimer (HDD Drive Capacity) For more information on the Disclaimer regarding HDD Drive Capacity, please refer to the Chapter 10, Disclaimers. CD-RW/DVD-ROM Some models are equipped with a full-size drive CD-RW/DVD-ROM module that lets you record data to rewritable CD/CD-RWs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adapter.
Page 29 TECRA A6 Features DVD Super Multi drive Some models are equipped with a full-size DVD with double layer disc Super Multi drive module with double layer recording support support that lets you record data to rewritable CD/ DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adapter.
Page 30 TECRA A6 Features Ports (depending on configuration) Docking Special port for connecting an Optional Port Replicator. External monitor 15-pin analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus The computer has 4 Universal Serial Bus (USB) ports that comply with the USB 2.0 standard, which enables data transfer speeds more than 40 times faster than USB 1.1 (which this computer also supports).
Page 31: Special Features
Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Key combinations that let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
Page 32 Power is restored when the hard disk is accessed. You can specify the time period in the TOSHIBA Power Saver utility. System Automatic This feature automatically places the system into...
Page 33: Utilities
TOSHIBA PC Diagnostic Tool displays the basic Diagnostic Tool information on the computer’s configuration and allows some of the built-in devices functionality to be tested. You can start the TOSHIBA PC Diagnostic Tool as follows: Start All Programs TOSHIBA Utilities...
Page 34 Click Start, point to All Programs, point to InterVideo WinDVD then click InterVideo WinDVD. TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks.
Page 35: Options
Use either PC4200 or PC5400 compatible memory modules. See your TOSHIBA dealer for details. Battery Pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare or replacement. High capacity battery An additional battery pack can be purchased from pack your TOSHIBA dealer.
Page 36 TECRA A6 Features TOSHIBA Hotkey This Program lets you quickly modify the system Utility configuration directly from the keyboard without running a system configuration program. TOSHIBA Mobile Allows you to connect your notebook computer to Extension an Optional Port Replicator.
Page 37: Chapter 2 The Grand Tour
Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 38 The Grand Tour DC IN LED The DC IN LED indicates the computer is connected to the AC adapter and it is plugged into an AC power source. Power LED In normal operating mode, the Power LED is green. If the system is in Standby Mode the LED will flash amber, while the LED will be off when the computer is turned off or is in Hibernation Mode.
Page 39: Right Side
The Grand Tour Right side The following figure shows the computer's right side. (USB) P NIVERSAL ERIAL ORTS PTICAL RIVE PTICAL RIVE ECURITY The right side of the computer Universal Serial Bus The Universal Serial Bus (USB 2.0 and 1.1 (USB) Ports compatible) ports enable USB-equipped devices such as keyboards, mice, hard drives, scanners,...
Page 40: Left Side
The Grand Tour Left side The following figure shows the computer's left side. RGB (M .LINK (IEEE 1394) P ONITOR ENTS ULTIPLE IGITAL EDIA (USB) P PC C NIVERSAL ERIAL TV O The left side of the computer RGB (Monitor) Port This 15-pin port lets you connect an external video display to the computer.
Page 41: Back Side
The Grand Tour Back side The following figure shows the computer back panel. LAN J ODEM DC-IN 15V J (USB) P NIVERSAL ERIAL ORTS The back side of the computer Modem Jack In regions where an internal modem is installed as standard equipment, this jack lets you use a modular cable to connect the modem directly to a telephone line.
Page 42: Underside
The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. ATTERY XPANSION EMORY OCKET OCKING OLES ATTERY ATCH ATTERY OCKING The bottom of the computer Battery Pack The battery pack powers the computer when the AC adapter is not connected.
Page 43: Front With The Display Open
To open the display, push the latch on the front of the display and lift it up. Position the display at a comfortable viewing angle. ISPLAY CREEN EFT AND IGHT PEAKERS TOSHIBA P RESENTATION UTTON OUCH TOSHIBA A SSIST UTTON...
Page 44: Keyboard Indicators
TOSHIBA Assist Press this button to launch an application quickly. Button The button setting can be changed in TOSHIBA Controls properties. To access the TOSHIBA Controls properties, click Start, click the Control Panel, click Printers and the Software and click the TOSHIBA Controls icon to open.
Page 45: Optical Disc Drive
The Grand Tour Optical Disc drive The computer will either have a CD-RW/DVD-ROM drive, DVD-ROM drive or double layer DVD Super Multi drive depending on its configuration. An ATAPI interface controller is used for the operation of these optical drives. When the computer is accessing a disc, an indicator on the drive glows.
Page 46 The Grand Tour CD-RW/DVD-ROM drive The full-size CD-RW/DVD-ROM drive module lets you record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") discs without using an adapter. The read speed is slower at the center of a disc and faster at the other edge.
Page 47 Power and Power-Up Modes, for details. The AC adapter Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 15 volts DC. Please use only the AC Adapter supplied with the computer or an AC adapter certified by TOSHIBA.
Page 48: Chapter 3 Getting Started
Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space - for your health and safety Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.
Page 49: General Conditions
Getting Started ■ Lighting ■ Work habits General conditions In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment. ■ Make sure there is adequate space around the computer for proper ventilation.
Page 50: Seating And Posture
Getting Started Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Below eye level 90°angles Foot rest Posture and positioning of the computer ■...
Page 51: Connecting The Ac Adapter
AC adapter to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes. Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 15 volts DC. User’s Manual...
Page 52: Opening The Display
Getting Started 1. Connect the power cord to the AC adapter. Connecting the power cord to the AC adapter 2. Connect the DC output plug on the AC adapter to the DC IN input port on the back of the computer. Connecting the adapter to the computer 3.
Page 53: Turning On The Power
Getting Started 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. Turning on the power This section describes how to turn on the power.
Page 54: Turning Off The Power
For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places in Power Options: Hibernate tab and TOSHIBA Power Saver: Basic Setup tab. Otherwise, the computer will shut down in Standby mode. If battery power becomes depleted, data saved in Standby will be lost.
Page 55: Starting Hibernation
2. Open Performance and Maintenance and open Power Options. 3. Select the Hibernation tab. 4. Select Enable Hibernate, then click OK button. 5. Open Toshiba Power Saver. 6. Select Setup Action tab. 7. Enable the desired Hibernation settings for When I press the power button and When I close the lid of my portable computer.
Page 56: Standby Mode
If the computer is not used or accessed in any way, including areas such as the receipt of an e-mail, for approximately 15 or 30 minutes when the AC adapter is connected, it will automatically enter Standby Mode. This function is the default setting within the TOSHIBA Power Saver utility. ■...
Page 57: Restarting The Computer
1. Click Start, then Shut Down and then Stand by. 2. Close the display panel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel. 3. Press the power button. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel.
Page 58: Restoring The Preinstalled Software
2. Switch on the computer and, when the In Touch with Tomorrow TOSHIBA prompt appears, press the F12 key to display the Boot Menu. 3. Use the up or down cursor key to select the CD-ROM/DVD drive in the display menu.
Page 59: Chapter 4 Operating Basics
Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal. Using the TouchPad To use the TouchPad, simply move your finger tip across it in the direction you want the on-screen pointer to go.
Page 60: Using The Internal Modem
Operating Basics The two buttons below the TouchPad are used like the buttons on a standard mouse. Press the left button to select a menu item or to manipulate text or graphics designated by the pointer. Press the right button to display a menu or other function depending on the software you are using.
Page 61: Important Safety Instructions
1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA Networking. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
Page 62: Properties Menu
Operating Basics Properties menu Click the icon with the secondary mouse button to display the following menu. The properties menu Settings You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system.
Page 63 If you find that the modem speed is low or communication is interrupted when you are using the modem, please set the CPU speed to Maximum within the TOSHIBA Power Saver utility. Disconnecting To disconnect the internal modem cable, follow the steps below.
Page 64: Lan
Operating Basics The computer is equipped with networking hardware that supports Ethernet LAN (10megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LAN (1000BASE-T). This section describes how to connect/disconnect to a LAN. Do not install or remove an optional memory module while the Wake-up on LAN feature is enabled.
Page 65: Wireless Lan
Internet is an open invitation for outsiders to abuse your ISP account and privileges. 2. TOSHIBA is not liable for the eavesdropping on your data due to the use of the wireless LAN connection and any damage that may occur thereof.
Page 66: Bluetooth Wireless Technology
Please refer also to the electronic information which is included with each software. This Bluetooth™ Stack is based on Bluetooth™ Version 1.1/1.2/2.0+EDR specification. TOSHIBA cannot confirm compatibility between any PC products and/or other electronic devices that use Bluetooth™ other than TOSHIBA mobile PCs.
Page 67: Using Optical Disc Drives
Bluetooth functionality. Product Support: The latest information regarding Operating System support, Language Support or available upgrades can be found on our web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe www.pcsupport.toshiba.com in the United States. Wireless communication switch You can enable or disable the wireless LAN function with the on/off switch.
Page 68 Operating Basics Loading optical disc media To load a disc, follow the steps below. 1. Turn on the power. 2. a. Press the eject button to open the drawer slightly. Eject button Pressing the eject button b. Pressing the eject button will not open the drawer when the computer's power is off.
Page 69 Operating Basics Pulling the drawer open 4. Lay the disc, label side up, in the drawer. Inserting a disc Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 5. Press gently at the center of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with its base.
Page 70: Removing Compact Discs
Operating Basics Closing the drive drawer Removing compact discs To remove the disc, follow the steps below. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical disc indicator to go out before you open the drawer.
Page 71 Operating Basics Buttons The TOSHIBA Assist button and the TOSHIBA Presentation button can be assigned functions and applications in the TOSHIBA Controls Properties. User’s Manual 4-13...
Page 72: Writing Cds On A Cd-Rw/Dvd-Rom Drive
DVD-ROM drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/-RW disc that may be caused by writing or rewriting with this product.
Page 73: When Writing Or Rewriting
Operating Basics TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.
Page 74: Writing Cds/Dvds On A Dvd Super Multi Drive Supporting Double Layer Disc Recording
Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
Page 75 Operating Basics DVD-R: DVD Specifications for Recordable Disc for General Version 2.0 TAIYOYUDEN CO., LTD. Matsushita Electric Industrial Co., Ltd. DVD-RW: DVD Specifications for Re-recordable Disc for Version 1.1 or Version 1.2 VICTOR COMPANY OF JAPAN, LIMITED MITSUBISHI CHEMICAL CORPORATION DVD+R: MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd.
Page 76 Operating Basics ■ Data deleted (erased) from a CD-RW and DVD-RW/+RW/-RAM disc cannot be recovered. Check the content of the disc carefully before you delete it. If multiple drives that can write data to discs are connected, be careful not to delete data from the wrong drive. ■...
Page 77: When Using Windvd Creator 2 Platinum
Operating Basics When writing or rewriting Please observe/consider the following when you write or rewrite to a CD-R/ RW, DVD-R/-RW/-RAM or DVD+R/+RW disc. ■ Do not perform any of the following actions when writing or rewriting: ■ Change users in the Windows XP operating system. ■...
Page 78: Important Information For Use
Operating Basics How to learn more about InterVideo WinDVD Creator Please refer to the on-line Help for additional InterVideo WinDVD Creator information. We pre-install WinDVD Creator. Important information for use Note the following limitations when you write video DVD: 1. Editing digital video ■...
Page 79 Operating Basics ■ Do not perform any of the following actions: ■ Operate the computer for any other function, including using a mouse or TouchPad or closing/opening the LCD panel. ■ Bump or cause vibration to the computer. ■ Use the Mode control button and Audio/Video control button to reproduce music or voice.
Page 80: Recordnow! Basic For Toshiba
Operating Basics RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: ■ DVD-Video cannot be created using RecordNow! ■ DVD-Audio cannot be created using RecordNow! ■ You cannot use the RecordNow! "Audio CD for Car or Home CD Player"...
Page 81: Dla For Toshiba
3. Mark the check box labelled "Verify data written to the disc after burning”. 4. Click the OK button. DLA for TOSHIBA Note the following limitations when you use DLA: ■ This software supports only rewritable discs (DVD+RW, DVD-RW, and CD-RW).
Page 82: Media Care
Operating Basics Media Care This section provides tips on protecting data stored on your discs and disks. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on it: 1.
Page 83: Tv-Out
Operating Basics TV-Out Use the TV-Out port to connect to a television. Be sure to use a 4 pin type S-video cable. For more details, see Appendix B, Display Modes. TV Out Port Setting up more than one display You can set up your computer to utilize more than one display, effectively spreading a single desktop screen across two monitors.
Page 84: Cleaning The Computer
Operating Basics If an external display will not be connected next time you use your computer, you should cancel any extended desktop or clone display settings before shutting down your computer. Clone display settings are those where more than one device has been selected and is simultaneously applicable.
Page 85: Chapter 5 The Keyboard
Chapter 5 The Keyboard The computer's keyboard layout is that of a 101/102-key enhanced keyboard. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are five types of keys: typewriter keys, keypad overlay, function keys, soft keys and cursor control keys.
Page 86: F1 ... F12 Function Keys
Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
Page 87: Hotkeys
The Keyboard Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key. Hotkeys Fn + ESC Volume Mute: Turns the volume on and off. Fn + F1 Instant Security: Enters screen saver mode and blanks the screen. To restore your desktop, press any key or use the TouchPad.
Page 88: Windows Special Keys
2 key while holding down the Fn key. Before using Fn + 1 and Fn + 2, you must install the TOSHIBA Zooming Utility. Please be aware that this 'zooming' function is only available within Microsoft Internet Explorer, Microsoft Office, Windows Media Player and Adobe Reader, and for the icons on the desktop.
Page 89: Numeric Mode
The Keyboard Numeric mode To turn on the Numeric mode, press Fn + F11 (Numeric mode indicator lights). Now try numeric data entry using the keys below. Press Fn + F11 again to turn off the overlay. The numeric keypad overlay (U.S.) Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay:...
Page 90: Temporarily Changing Modes
The Keyboard Temporarily using overlay (overlay off) While using the normal keyboard, you can temporarily use the keypad overlay without turning it on: 1. Press and hold down Fn. 2. Check the keyboard indicators. Pressing Fn turns on the most recently used overlay.
Page 91: Chapter 6 Power And Power-Up Modes
Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer's operating capability and battery charge status are affected by the power conditions: whether an AC adapter is connected, whether a...
Page 92: Power Indicators
• LED: Battery flashes amber DC IN off Battery capacity Computer goes into exhausted Hibernation or shuts down (depending on the TOSHIBA Power Saver setting) No battery • No operation • LED: Battery off installed DC IN off Power indicators...
Page 93: Battery Types
Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adapter connected: Green Indicates the AC adapter is connected and is correctly supplying power to the computer. No light Indicates the AC adapter is not connected. Power indicator Check the Power indicator to determine the power status with the AC adapter connected:...
Page 94 Press <F1> to resume, <F2> to Setup. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.
Page 95: Care And Use Of The Battery Pack
Power and Power-Up Modes Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance.
Page 96 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.
Page 97: Charging The Batteries
Power and Power-Up Modes 6. Be sure to monitor the remaining battery power. If the battery pack or real time clock battery discharge completely, Standby Mode will not function, and data in memory will be lost, and the computer might register an incorrect time and date.
Page 98: Battery Charging Notice
Power and Power-Up Modes Time The following table shows the time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack about 12 or longer about 4 or longer RTC battery about 24 about 24 with AC or Battery pack The charging time when the computer is on is affected by ambient...
Page 99: Monitoring Battery Capacity
Leaving the AC adapter connected will shorten battery life. At least once a week, run the computer on battery power until the battery is fully discharged, then recharge the battery. Monitoring battery capacity Remaining battery power can be monitored by the TOSHIBA Power Saver. Refer to Utilities in Chapter 1, TECRA A6 Features.
Page 100: Replacing The Battery Pack
Power and Power-Up Modes Retaining data with power off (standby mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery Approximately 2 days (Standby mode, 12-cell) Approximately 1.5 days (Standby mode, 9-cell) Approximately 1 days (Standby mode, 6-cell) Approximately 1 month (Shut down mode, all) RTC battery...
Page 101 Power and Power-Up Modes 5. Unlock the Battery Pack Lock. Removing the battery pack-1 6. Slide the battery pack latch to the right, then pull the battery out of the battery bay. Removing the battery pack-2 User’s Manual 6-11...
Page 102: Installing The Battery Pack
The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer.
Page 103: Toshiba Password Utility
Power and Power-Up Modes TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Password Utility are different from the ® Windows login password. User Password To start the utility, point to or click the following items:...
Page 104: Power-Up Modes
Power and Power-Up Modes If you enter the password incorrectly three consecutive times, the computer shuts down. You must turn on the computer again and re-enter the password. Power-up modes The computer has three power-up modes: ■ Hibernation (saves data in memory to the hard disk) ■...
Page 105: Chapter 7 Hw Setup
Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup utility to configure your computer. TOSHIBA HW Setup lets you configure settings for various hardware devices through a number of tabs titled General, Password, Display, CPU, Boot Priority, Keyboard, LAN, and USB.
Page 106 HW Setup General This window displays the BIOS version and contains two buttons: Default Return all HW Setup values to the factory settings. About Display the HW Setup version. Setup This field displays BIOS Version and date. Password This tab allows you to set or reset the user password for power on. Display This tab lets you customize your computer's display settings for either the internal LCD screen or for an external monitor.
Page 107: Boot Priority
HW Setup Boot Priority Boot Priority Options This option sets the priority for booting the computer. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: Selects the USB floppy disk drive. Selects the Network.
Page 108 HW Setup Wake-up on LAN This feature lets the computer's power be turned on when it receives a wake-up signal from the LAN. Enabled Enables Wake-up on LAN. Disabled Disables Wake-up on LAN (Default). The Wake-up LAN function support AC adapter mode only, before you plan to use this function please make sure your AC power source is connected to system properly.
Page 109: Chapter 8 Optional Devices
Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory ■ PC card ■ SD (Secure Digital) / MMC (MultiMediaCard) / MS (Memory Stick) /MS Pro (Memory Stick Pro) / xD (xD-Picture Card) cards ■...
Page 110: Pc Card
The computer is equipped with a PC Card expansion slot that can accommodate one 5 mm Type II card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC Cards, including PC Card 16's multifunction card and CardBus PC Cards.
Page 111 Optional Devices Removing a PC card 1. Click the Safely Remove Hardware icon on the Task Bar. 2. Click the PC Card you want to remove. 3. Press the eject button of the PC Card to extend it. 4. Press the extended eject button to pop the card out slightly. 5.
Page 112: Sd/Mmc/Ms/Ms Pro/Xd Memory Cards
Optional Devices SD/MMC/MS/MS Pro/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory. Card Type Capacities 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB,...
Page 113: Removing A Memory Card
Optional Devices Be sure the memory card is oriented properly before you insert it. ® If Windows fails to read the card, remove it then reinsert it. ■ The multiple digital media card slot only accepts one type of card at a time.
Page 114: Memory Expansion
CAUTION: If you want to upgrade system memory, you should only use certified modules. Ask your vendor or check the TOSHIBA web site for a list of approved memory products. User’s Manual...
Page 115: Installing A Memory Module
Optional Devices Installing a memory module If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. Follow these steps to install a memory module: 1.
Page 116: Removing A Memory Module
Optional Devices 7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. Installing a module 8. Seat the cover and secure it with the screw. 9. Replace the battery pack as described in Chapter 6, Power and Power- Modes.
Page 117: Additional Battery Pack
Optional Devices Removing the memory module 6. Seat the cover and secure its screw. 7. Replace the battery. Additional battery pack You can increase the portability of the computer with additional battery packs. If you're away from an AC power source and your battery runs low, you can replace it with a freshly charged battery.
Page 118: External Monitor
Optional Devices External monitor An external analog monitor can be connected to the external monitor port on the computer. To connect a monitor, follow the steps below. 1. Turn the computer off. 2. Connect the monitor to the external monitor port. 3.
Page 119 Optional Devices For Intel 1. Click Start Control Panel Appearance and Themes. 2. Choose Display to open the Display Properties dialog box. 3. Click the Settings tab. 4. Click the Advanced button. The Intel Plug and Play Monitor dialogue box opens. User’s Manual 8-11...
Page 120 Optional Devices 5. Click the Graphics Properties button. 6. In the subsequent dialogue box, click Display Devices and then set up your television and notebook displays. User’s Manual 8-12...
Page 121 Optional Devices For ATI 1. Click Start Control Panel Appearance and Themes. 2. Choose Display to open the Display Properties dialog box. 3. Click the Settings tab. User’s Manual 8-13...
Page 122 Optional Devices 4. Click the ATI Catalyst Control Center button. 5. Setup your television and notebook displays. For NVIDIA 1. Click Start Control Panel Appearance and Themes. 2. Choose Display to open the Display Properties dialog box. 3. Click the Settings tab. User’s Manual 8-14...
Page 123 Optional Devices 4. Click the Advanced button. The NVIDIA Quadro NVS 110M dialogue box opens. 5. Select nView Display Settings from the NVIDIA Quadro NVS 110M side menu. User’s Manual 8-15...
Page 124 Optional Devices 6. Select Screen Resolutions & Refresh Rates from NVIDIA Quadro NVS 110M side menu. 7. Setup your television and notebook displays. User’s Manual 8-16...
Page 125: I.link (Ieee1394)
Optional Devices i.LINK (IEEE1394) i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as: ■ Digital video cameras ■ Hard disk drives ■ MO drives ■ Optical disc drives i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply.
Page 126: Security Lock
Optional Devices Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer.
Page 127 Optional Devices The following ports and accessories are available on the Advanced Port Replicator III Plus. ■ RJ45 LAN jack ■ RJ11 Modem jack ■ External monitor port ■ Parallel port ■ Serial port ■ PS/2 keyboard port ■ DC In 15V jack ■...
Page 128: Troubleshooting
Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.
Page 129: Preliminary Checklist
Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.
Page 130: Hardware And System Checklist
Troubleshooting Software The problems may be caused by your software. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation.
Page 131: Self Test
If any of the following conditions are present, the self test failed: ■ The computer stops and does not proceed to display information or messages except the TOSHIBA logo. ■ Random characters appear on the screen, and the system does not function normally.
Page 132: Overheating Power Down
Troubleshooting Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems.
Page 133 Battery doesn't power Check the power consumption settings in the the computer as long as TOSHIBA Power Saver Utility. Consider using a expected. power saving mode. Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, Keyboard.
Page 134 Troubleshooting LCD panel Problem Procedure Lines appear broken. Check if you are in DOS mode. In DOS, lines may appear broken, because of the LCD screen's higher resolution. The Windows display should appear normal. No display Press the Hotkey Fn + F5 to change the display priority and ensure it is not set for an external monitor.
Page 135 Troubleshooting i.LINK (IEEE1394) Problem Procedure i.LINK device does not Make sure the cable is securely connected to the function computer and to the device. Make sure the device's power is turned on. Reinstall the drivers. Open the Windows Control Panel and double-click the Add New Hardware icon.
Page 136: Sound System
Troubleshooting Monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation. Problem Procedure Monitor does not turn on Make sure that the external monitor's power switch is on. Confirm that the external monitor's power cable is plugged into a working power outlet.
Page 137: Pointing Device
Troubleshooting Pointing device If you are using a USB mouse, also refer to the section in this chapter and to your mouse documentation. TouchPad Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to Pad shaped as an hourglass, wait for it to resume its operation normal shape and try again to move it.
Page 138: Tv Output Signal
Troubleshooting Problem Procedure The mouse pointer Try changing the speed setting in the mouse moves too fast or too control utility. slow 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Pointer Options tab. 3.
Page 139 Troubleshooting Problem Procedure Cannot access LAN or Check for a firm cable connection between the the Wake up on LAN LAN hub. feature does not work Make sure the AC adapter is connected. You cannot access a LAN using the computer's battery power.
Page 140 Troubleshooting Modem Problem Procedure Communication Make sure the computer's internal modem software can't initialize settings are correct. Refer to Phone and Modem the modem Options Properties in the Control Panel. You can hear a dial tone If the call is going through a PBX machine, make but can't make a call sure the communication application's tone dial detection feature is disabled.
Page 141 Troubleshooting CD-RW/DVD-ROM drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a Make sure the drive's drawer is securely closed. disc in the drive Press gently until it clicks into place. Open the drawer and make sure the disc is properly seated.
Page 142 Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
Page 143 Troubleshooting Problem Procedure Some discs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware configuration matches your software's needs. Check the disc's documentation. Check the type of disc you are using. The drive supports: DVD-ROM: DVD-ROM, DVD-Video...
Page 144 DVD Super Multi drive. Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■...
Page 145: Toshiba Support
Date/Time. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.
Page 146: Disclaimers
Chapter 10 Disclaimers This chapter states the Disclaimer(s) information applicable to TOSHIBA computers. Central Processing Unit ("CPU") Performance Disclaimer. CPU performance in your computer product may vary from specifications under the following conditions: ■ use of certain external peripheral products ■...
Page 147: Memory (Main System)
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
Page 148: Lcd
Disclaimers Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode. The screen will dim when the computer is operated on battery power and you will not be able to increase the brightness of the screen.
Page 149: Lcd Brightness And Eye Strain
Disclaimers LCD Brightness and Eye Strain Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes. User’s Manual 10-4...
Page 150: Specifications
Appendix A Specifications This appendix summarizes the computer's technical specifications. Dimensions 343 mm × 242 mm × 38 mm (MAX) 36.5mm 242mm 29.8mm 29.8mm 38mm 36.5mm User’s Manual...
Page 151: Environmental Requirements
Specifications Weight Starting at 2.26kg/4.99lbs* * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected. Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5 °C to 35 °C 20% to 80% Non-operating -20 °C to 65 °C Conditions Altitude (from sea level) Operating...
Page 152 Specifications Communication Speed Data transmission and reception 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.90/V.92 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/40000/41333/42666/44000/45333/ 46666/48000/49333/50666/52000/53333/54666/ 56000 bps 2400/4800/7200/9600/12000/14400 bps Error correcting MNP class 4 and ITU-T V.42 Data compression MNP class 5 and ITU-T V.42bis User’s Manual...
Page 153: Display Modes
Appendix B Display Modes This appendix contains a table listing with all the display modes when the display is set to an external monitor. CRT Display Color Depth (bpp) Refresh Rate (Hz) Resolution 800 × 600 16 bpp 60, 75, 85, 100 32 bpp 60, 75, 85, 100 1024 ×...
Page 154: Ac Power Cord And Connectors
Appendix C AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 2 meters...
Page 155 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U.
Page 156: If Your Computer Is Stolen
What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.
Page 157: Toshiba Theft Registration
In the Computer Systems page, open the Support & Downloads menu and choose the Stolen Units Database option. Your entries are used to track your computer at our service points. TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr.
Page 158 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: Alternating current AGP: Accelerated graphics port BIOS: Basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write CMOS: Complementary metal-oxide semiconductor CPU: Central processing unit CRT: Cathode ray tube DC: Direct current...
Page 159 Glossary RAM: Random access memory ROM: Read only memory RTC: Real time clock SCSI: Small computer system interface TFT: Thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: Video graphics array WXGA: Wide extended graphics array adaptor: A device that provides an interface between two dissimilar electronic devices.
Page 160 Glossary cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
Page 161 Glossary CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. DC: Direct Current.
Page 162 Glossary format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk. function keys: The keys labeled F1 through F12 that tell the computer to perform certain functions.
Page 163 Glossary Light Emitting Diode (LED): A semiconductor device that emits light when a current is applied. Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewing-side coating is etched into character forming segments with leads that extend to the edge of the glass.
Page 164 Glossary parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1. 2) In serial communications, an error detection bit that is added to a group of data bits making the sum of the bits even or odd. Parity can be set to none, odd, or even.
Page 165 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. TouchPad: A pointing device integrated into the TOSHIBA computer palm rest. Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.

This manual is also suitable for:

Tecra a6

Toshiba PTA60U-00K003 User Manual

Chapter 1 TECRA A6 Features

Chapter 2 The Grand Tour

Chapter 3 Getting Started

Chapter 4 Operating Basics

Chapter 5 The Keyboard

Chapter 6 Power and Power-Up Modes

Chapter 7 HW Setup

Chapter 8 Optional Devices

Chapter 9 Troubleshooting

Chapter 10 Disclaimers

Appendix A Specifications

Appendix B Display Modes

Appendix C AC Power Cord and Connectors

Quick Links

Related Manuals for Toshiba PTA60U-00K003

Summary of Contents for Toshiba PTA60U-00K003

This manual is also suitable for:

Table of Contents